Palsonic 5159G Owners Manual - Page 11

OPERATION Tuning in (continued) To skip unnecessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected with POS+/- button. PRESET 1. Enter into the PRESET menu, press the POS+/- POS 24 SKIP OFF button to select POS., then select the unwanted program number withthe VOL+/- button. BAND FINE AFT UHF ON SEARCH ASM S-RCV OFF 2. Press the POS+/- button to select "SKIP". Press the VOL+/- button to select "SKIP ON". Thus, after exiting the menu, the position number will then be skipped when you select programs with the POS+/- button. If you want to skip other unwanted programs, repeat step 1 above to change the program number. Note: you can select the skipped channel by pressing the direct channel select buttons, and the position number displayed on the screen is in red. To restore skip a position number PRESET POS SKIP BAND FINE AFT SEARCH ASM S-RCV 24 ON UHF ON OFF Enter into the PRESET menu, Select the position number you want to restore. Press the POS+/- button to select "SKIP". Press the VOL+/- button to select "SKIP OFF". MFT (Manual Fine Tuning) When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture and sound are not standard), you can correct them by making use of Manual Fine Tuning (FINE). (or OFF) 1. Enter into PRESET menu, select the program number you want to fine-tune. PRESET POS SKIP BAND FINE AFT SEARCH ASM S-RCV 25 OFF UHF ON OFF 2. Press the POS+/- button to select FINE, then press and hold the VOL+ or VOL- button, the channel begins fine tuning until the optimum picture and sound is achieved. (Press VOL+ button to fine-tune upward, while VOL- button to fine-tune downward. The AFT function will be set to OFF mode automatically) PRESET POS SKIP BAND FINE AFT SEARCH ASM S-RCV 25 OFF UHF ON OFF Note: if some channel's colour or sound is abnormal, it may be that the setting of the colour or the sound system is wrong, please do adjustment according to The setting of colour and sound system (on page 10) to set the proper colour and sound system. 3. To exit the menu, press the RECALL button. 9