Palsonic 5159P Owners Manual - Page 10

OPERATION Tuning in (continued) . Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO. SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. To preset channels (Manual search) Manual search If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search. 1. Enter into POS.MEMORY menu, press the or button to select and highlight POSITION. Press the or button to select a desired position number (from 00~99). Note: press the or button to select a channel number within 0.7 second. Press and hold the or button for over 0.7 second to select a decimal number. POS.MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!...... 2. Press the or button to select and highlight SEARCH. Press the button to search channels from current channel to higher channel. Press the button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorised with the preset channel number. POS.MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!...... Note: you can also make use of BAND selection to quicken the searching process in your desired band. Pressing the or button moves the band to the next step in the sequence below. VHFL VHFH UHF POS.MEMORY POSITION 01 BAND VHFL SKIP OFF SEARCH DOWN MFT DOWN AUTO MEMORY !!!!!!...... 3. When you want to store another channel with another position, repeat steps 1 & 2 above. 8