Palsonic PDP4250 Owners Manual - Page 23

Basic Operations (continued) Select input source signal 1 Press the SOURCE button to access source menu. 2 Press VOL+ or VOL- to select a desired input channel. 3 Press ENTER to confirm and the unit display signal from the selected input channel. source A D C1 C2 AV TV VGA A--------VGA, select signal from VGA (5-pin D-sub) terminals. D--------DVI, select signal from DVI terminals. C1------YCbCr1, select signal from YCbCr1 terminals. C2------YCbCr2, select signal from YCbCr2 terminals. AV------VIDEO (S-VIDEO), select signal from S-Video or Video terminal. The S-Video is prior to Video terminal when they are connected at the same time. TV------Select TV signal. Note: This unit identifies the type of component video terminals automatically. If you connect Y, Cb, Cr terminals, the screen displays YCbCr detected on the bottom-right corner. Similarly, if the component video terminals are Y, Pb, Pr, the screen displays YPbPr detected on the bottom-right corner. Selecting a MENU language 1 Press MENU to display the menu main page. 2 Press VOL+/- to display settings menu page. 3 Press CH to select language item. 4 Press VOL+/- to select an OSD language. settings menu background language video format audio format opaque English AUTO BG right/left to change language Note: In some models, there may be only one menu language available. In this case, the menu language may not be adjusted by the user. 22