Palsonic PDP4280HD Owners Manual - Page 9

Basic Operation Power On/Off 1. Connect the TV unit to power source using power cord. 2. When the power indicator in red, the TV is in standby mode. Now press the "POWER" button on remote control or front panel to turn on the TV. The TV works normally when the power indicator is in green. 3. Switch the TV to standby mode, just press "POWER" button on the remote control or front panel. Now the indicator will be in red. 4. The power consumption is less than 1W in standby mode. If unused for a long time, please disconnect the power cord from the wall outlet. Note: The TV set can turn off automatically after 5 minutes while there has no signal input. Select Viewing Source Press the "SOURCE" button to display the sources list. Input Source DTV TV AV AV2 AV3 Component Component 2 PC RGB HDMI 1 HDMI 2 EXIT OK Please use the direction buttons to select desired signal, and press "OK" or " " button to confirm. Note: Please make sure the connection for your choice is available. For example, "TV" for watching TV, "VGA" for PC .If the TV can't find any signal input, you can try to press ''POWER'' button on remote control or the on the panel to restart the TV. 8