Palsonic TFTV5027FL Owners Manual - Page 19

TV Operation and System Setup Auto Scan Select this item and press the OK or ► button to enter the submenu. Press the ▲▼buttons to highlight Country or Mode and press ◄► buttons to adjust, then press▲▼button to select Start and press OK or ► button to start scanning. A new window appears on the screen, where the status of the searching is documented. The values of the found TV broadcast programs of ATV, DTV and Radio are listed. After finishing of the searching, all found TV programs will be saved into the channel list. You can load at the TV channel list by press the CH.LIST button. Press the EXIT button to exit. NOTE: Please allow a few minutes for this feature to scan the entire range of available programs. DTV Manual Scan 1. Press the ▲▼ buttons to select Manual Scan, then press ▲▼ buttons to select Digital Manual Scan and press the OK or ► button to enter the submenu. The screen will display as shown on the right: 2. In the submenu, you can define on which channel shall be runs the search. You can also set the frequency and strength. 3. Starts the searching by press the Start button in the submenu. 4. To leave the DTV Manual tuning, press the EXIT or MENU button. ATV Manual scan 1. Press the ▲▼ buttons to select Manual Scan, then press ▲▼ buttons to select Analog Manual Scan and press the OK or ► button to enter the submenu. The screen will display as shown on the right: 2. Press the ▲▼ buttons to select desired item, press the ◄► buttons to adjust. 3. To leave the ATV Manual Search, press the EXIT or MENU button. 18