Palsonic TFTV8070MW Owners Manual - Page 10
Wall Mounting, Please assemble the stand cover into the unit in order to protect your unit while
![]() |
View all Palsonic TFTV8070MW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Overview Back View HEADPHONE AV COAX HEADPHONE AV COAX P C AUDIO PC AUDIO VGA USB POWER HDMI1 HDMI2 HDMI3 Y Pb Pr RF USB POWER HDMI1 HDMI2 HDMI3 Y Pb Pr POWER: Connect to the power. HDMI 1/2/3: Connect it to the HDMI of DVD or other equipment. YPbPr: Connect them to the YPbPr video output terminal of DVD. RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal. USB: USB jack for Recording and Media. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC. PC AUDIO: Connect it to the audio output terminal of PC. COAX:Digital output to AV receiver. AV: Connect it to video output terminal of DVD.(shared with YPbPr) HEADPHONE: Connect it to your headphone or other audio equipment. Wall Mounting The TV is provided with mounting holes for a VESA (200x100mm) approved wall mounting bracket (NOT SUPPLIED). Remove the Posi screws holding the base to the base bracket and lift the base away (do not remove the base mounting bracket), fix the Stand Cover. Mount the VESA bracket using 4xM5x10mm ISO metric threaded screws (not supplied). Do not use screws longer than 10mm, it will occur damage to the internal parts. Fit the wall bracket securely following themanufacturers instructions. * Please assemble the stand cover into the unit in order to protect your unit while using the wall mount. (Base) (Stand Cover For Wall-mounting) 7 1. Insert the stand Cover for Wall-mounting in the bottom of the TV̻ 2. Attach the Stand Cover with the supplied screws.
![](/manual_guide/products/palsonic-tftv8070mw-owners-manual-3688229/10.png)