Palsonic TFTV8075MW Owners Manual - Page 15

Basic Operation Turning the TV On and Off  Connect the power adapter to wall AC Outlet. A front mounted indicator light will be illuminated red indicating the TV has power.  Press the POWER button on the remote control or the TV set. The TV's indicator light will be illuminated blue indicating the TV is turned ON.  Press the POWER button again to turn the TV off. A front mounted indicator light will be illuminated red indicating the TV is off. Source selecting The unit incorporates multiple input sources which can be selected via the INPUT button on the television or remote. Press the INPUT button to enter Input menu, as shown right. On the input menu, press the ▲▼ direction buttons to select the desired input source and press the OK button to enter the selected source immediately. Channel Selection 1. Using CH▲▼ button 2. Use the CH.LIST button to display the channel list and press the ▲▼ buttons to select channel. 3. You have also quick access to the different TV channels by using the numeric buttons. 4. Using button on the remote control to view the last channel you were watching. The First Time Installation The first time you turn on the TV or after you reset all the settings to their original status, the Auto Installation will start. Follow the prompts on the screen to set the OSD Language, Mode Setting, Country and Auto Scan, then press ▲▼ buttons to select Start and the channel tuning starts immediately. All found TV programs will be saved into the channel list. You can load at the TV channel list by press the CH.LIST button. 14