Palsonic TFTV812A Owners Manual - Page 16

Basic Operations Turning On/Off the Power Turning On Insert the power cord into the wall outlet. Press the Power Switch on the unit, then press the Power button on the unit or on the remote control. The unit will be turned on and you will be ready to use its features. Note =You can also use VOL+/- , MENU, SOURCE or buttons on the TV set to turn on the TV. Turning Off With the power on, press the Power button on the unit or on the remote control to turn off the unit, and put the unit in standby mode. To cut off the power completely, press the Power Switch. Note ! If there is no signal input for a certain time, the TV will auto go to standby mode. Selecting the Input Signal Source 1 Press SOURCE button. 2 Press 6or 5to select the input source. Options include: ! TV - Watch the TV signal. ! AV1 - Watch the signal from the AV1 input terminals. ! AV2 - Watch the signal from the AV2 input terminals. ! S-Video - Watch the signal from the S-VIDEO input terminal. ! YPbPr - Watch the signal from the COMPONENT input terminals. ! VGA - Watch the signal from the VGA jack. ! HDMI1 - Watch the signal from the HDMI 1 input jack. ! HDMI2 - Watch the signal from the HDMI 2 input jack. 3 Press 4 button to confirm the selection. Note = You can also make use of SOURCE button on the TV set to select the input source. SOURCE TV AV1 AV2 S-Video YPbPr VGA HDMI1 HDMI2 MOVE SELECT Displaying the Status Information Press the DISPLAY button to display the current status information such as channel number or signal source. 14