Palsonic pal245fr User Manual - Page 7

Instructions for Use, or 4 mm. When defrosting, remove all

Get Palsonic pal245fr PDF manuals and user guides View all Palsonic pal245fr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

4. When gas leaks from its container, don't pull the plug out or in. It may arouse sparks and fire calamities. Instructions for Use 1.When operating the refrigerator for the first time, run it without loading any food until it reaches the desired temperature. Usually it takes 2 or 3 hours, then set the thermostatic dial at the setting desired and put your food in the refrigerator. 2. The temperature of the refrigerator can be adjusted by turning the thermostatic dial. A medium setting of the thermostatic dial is the most suitable for general operation. 3. Defrost the refrigerator whenever the layer of frost on the surface of the evaporator reaches 3 or 4 mm. When defrosting, remove all food and the ice cube tray and set the thermostat to the "OFF" position. Put the drip tray under the evaporator to collect any melted water. After the frost has melted, discard the water and dry up the interior of the refrigerator. The refrigerator can then be restarted by turning its thermostat to the desired setting. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
6
4. When gas leaks from its container, don’t pull the
plug out or in. It may arouse sparks and fire
calamities.
Instructions for Use
1.When operating the refrigerator for the first time,
run it without loading any food until it reaches
the desired temperature. Usually it takes 2 or 3
hours, then set the thermostatic dial at the
setting desired and put your food in the
refrigerator.
2. The temperature of the refrigerator can be
adjusted by turning the thermostatic dial. A
medium setting of the thermostatic dial is the
most suitable for general operation.
3. Defrost the
refrigerator
whenever the
layer of
frost on the surface of the evaporator
reaches
3 or 4 mm. When defrosting, remove all
food
and the ice cube tray and set the thermostat
to
the “OFF” position. Put the drip tray under
the
evaporator to collect any melted water. After
the
frost has melted, discard the water and dry
up
the
interior
of
the
refrigerator.
The
refrigerator can then be restarted by turning its
thermostat to the desired setting.