Palsonic pal300chf Owners Manual - Page 6

Energy Saving Tips

Get Palsonic pal300chf PDF manuals and user guides View all Palsonic pal300chf manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

The door will not close properly. The freezer is not level. The gasket is dirty. The storage basket is out of position. Energy Saving Tips Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible. Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance). For household refrigerating appliances, in normal temperature conditions, please arrange the thermostat at the middle setting. Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient temperature. Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is 3-5 mm thick. If it is the outer condenser, the rear wall should be always clean, free of dust or any impurities. Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
The door will not close properly.
The freezer is not level.
The gasket is dirty.
The storage basket is out of position.
Energy Saving Tips
Try not to open the door too often, especially when the weather is wet and hot.
Once you open the door, mind to close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate
air circulation behind the appliance).
For household refrigerating appliances, in normal temperature conditions,
please arrange the thermostat at the middle setting.
Before loading the appliance with packages of fresh foods, make sure they are
cooled to ambient temperature.
Ice and frost layer increase energy consumption, so do clean the appliance as
soon as the layer is 3-5 mm thick.
If it is the outer condenser, the rear wall should be always clean, free of dust or
any impurities.
Always consider instructions stated in sections Positioning and Energy Saving
Tips, otherwise the energy consumption is substantially higher.
5