Palsonic pt6525su Instruction Manual - Page 20

Supporing Signals This TV is embedded with one digital media player. It can find devices that support USB1.1/2.0, including flash disk, USB hard disk and digital camera. It supports functions as: Display picture, Play music files, Play video files. Note: Please do not remove the cable during the data transfer. It may cause problems for the system. Picture Music Video Codec JPEG, PNG, BMP Audio Codec MP-(1/2/3), AAC, AC3 Container MPG, MPEG, MP4, MKV, 3GPP, AVI, FLV HD/FHD: MPEG-(1/2/4), MVC, H.264, H.265 Video Codec UHD: H.264, H.265 Audio Codec MP-(1/2/3), AAC, AC3 Basic Operation Turning the TV On and Off How to turn the TV on or off 1. Insert the power cord plug into a polarized AC outlet. 2. If TV is in standby mode, press POWER button on the remote control or button on the bottom panel of LED TV. 3. Normal picture will be displayed on the screen after 15 seconds. If no signal input, "No Signal" will be displayed on the screen. 4. If temporary POWER off is required, press POWER button on the remote control or button on the bottom panel. 5. If you want to completely switch off the power for this unit, unplug the power cord plug for this unit. 6. After switching off the unit, you should wait at least 5 seconds before switching on again. Status indication lamp Red light on: In standby mode. Green light on: In power on mode. Auto power-off 1. If there is no signal, the TV will automatically enter standby mode after 10 minutes. 2. In VGA mode, if no any operation 15 seconds later, TV will enter standby mode. Memory before turning TV off The picture and sound settings and preset channels will be memorized at the point when the TV is turned off. When the TV is started up again it will work accordingly with these settings. 19