Panamax MAX5300 Owners Manual - Page 6
Feature Overview
View all Panamax MAX5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FEATURE OVERVIEW Switched Outlets Pushbutton: 1 of 2 Triggers that can activate a turn-on or shutdown sequence for Outlet Bank 2 and High-Current outlets. LED Indicators: Status indicator lights for Switched Outlets, DC Voltage Trigger, Ground OK, Line Fault and Unsafe Voltage Meter Light Dimmer: Controls brightness of the Voltmeter backlighting. Voltmeter: Backlit analog meter measures incoming voltage source from 0-150 VAC. Convenience Outlet: Provides a quick convenient way to plug in components such as camcorders and video game systems. 15A Circuit Breaker: Opens in the event that equipment plugged into the MAX® 5300 draws too much current. When the white button of the breaker is visible, the breaker has opened. Reduce the load and push to reset. Filtered Outlet Bank 1: Four Always-On, Balanced Double L filtered outlets for audio/video components that require constant power to maintain programmed settings. Filtered Outlet Bank 2: Four switched, Balanced Double L filtered outlets for audio/video components that do not require constant power. High-Current Outlet Bank: Two delayed outlets designed for high-current components such as amplifiers and powered subwoofers. The current available to connected equipment is not limited by the noise filtration components. Satellite Coax Jacks: Two pairs of gold plated F-Connectors optimized for Satellite TV signal line protection. Cable TV Coax Jacks: Two pairs of gold plated F-Connectors optimized for Cable TV and non-amplified Rooftop Antenna signal line protection. IEC Main Power Receptacle: Power cord connects to this receptacle. Ground Lug: Provides a common grounding point for equipment with separate ground leads. 4 Voltage Sense Trigger Input: 1/8 inch Mini-Plug jack. Connect to a remote trigger device that provides 12VDC to trigger a startup/shutdown sequence. This is the second trigger that will activate the MAX® 5300 turn-on or shutdown sequence. (See switched outlets pushbutton on front panel). Voltage Sense Trigger Output: 1/8 inch Mini-Plug jack. Connecting a 12VDC trigger to the Voltage Sense Circuit will allow the same signal to pass through the Voltage Sense Output to control the startup/shutdown of an additional device. High-Current Outlets Turn-On Switch: 3-position slide switch. Allows adjustment of the Turn-On delay for the two High-Current Outlets. Choose between 0, 10 and 30 seconds. Outlet Bank 2 TurnOff Switch: 3-position slide switch. Allows adjustment of the Turn-Off delay for Outlet Bank 2. Choose between Always-On, 10 and 30 seconds. Telephone Jacks: In/Out connections for telephone line or pay-per-view line protection. 1690 Corporate Circle, Petaluma, CA 94954 • www.panamax.com