Panamax MB1000 Datasheet - Page 2

MB1000 FRONT/BACK PANELS FEATURES Outlet Bank 1 Indicator Illuminated blue when outlet bank 1 is switched on. Line Fault Indicator This LED will illuminate in red to warn the user that a wiring problem such as a bad/missing ground or reversed wiring exists within the AC receptacle. If illuminated, disconnect all equipment and contact an electrician to insure outlet is properly wired. IR Detector IR Detector, for sampling IR remote control signals. Menu Navigation Knob Rotate clockwise to navigate to the next screen, counter-clockwise to return to the previous screen, push to select menu item. Status Display LCD displays status and menu navigation items. Power Switch Press and hold the power button for 2 seconds to turn the UPS ON or OFF. Removable Battery Access Panel Easy to remove for battery access and replacement. Outlet Bank 2 Indicator Illuminated blue when outlet bank 2 is switched on. 10 Ft. AC Power Cord Circuit Breakers Resettable circuit breakers provide optimal overload protection. Outlet Bank 2 - Non-Critical-Load Outlets Four battery powered, surge protected and AVR outlets for connected equipment insures temporary uninterrupted operation of connected equipment during a power failure. These outlets will shut off when the batteries drain to a designated level to reserve remaining battery charge from the critical load outlets. Ground Lug Outlet Bank 1 - Critical Load Outlets Four battery powered, surge protected and AVR outlets for critical-load equipment insures temporary uninterrupted operation of connected equipment during a power failure. IR Control Section Indicator LED's - Indicates status IR Output Jacks - Standard 1/8" (3.5mm) mono jack for connection to an IR flasher (IR flashers not included). USB to Computer RS-232 Serial Communication Port The serial port allows connection and communication between the UPS and an automation or computer system. This allows the installer to program a number of variables including the Critical Load Battery Threshold. See the software documentation for more information. MB1000 SPECIFICATIONS Input Voltage Frequency AC Power Current Rating Surge Protection Overvoltage Shutoff, fast rise Overvoltage Shutoff, slow rise Undervoltage Shutoff Automatic Voltage Regulation, Sensitive Mode Capture Range Automatic Voltage Regulation, Sensitive Mode Output Range Automatic Voltage Regulation, Standard Mode Capture Range Automatic Voltage Regulation, Standard Mode Output Range Filtration 40dB min from 100kHz-2MHz 65dB max @ 270kHz 85 - 137 Vac 57 - 63 Hz 12 A 900 Joules 150 ± 5 V 132 ± 5 V 90 ± 5 V 98 - 135 V 120 ± 5% 93 - 145 V 120 ± 10% UPS Output Voltage Frequency UPS Output Capacity UPS Backup Time Transfer Time 120 ± 5 V Simulated Sine Wave 60 Hz ± 1% 1000VA 600W @ 0.6pf 3 minutes at full load < 10ms Specifications subject to change due to product upgrades and improvements.. © 2009 Panamax Inc. Panamax and the Panamax logo are registered US trademarks of Panamax. MB1000 prevents critical equipment from losing setup configuration, stored data and hard-disk crashes. Shuts off projection equipment via IR control to allow the projector bulbs to go through a proper cool-down cycle before shutting off. WEIGHTS & MEASUREMENTS, QUANTITIES, UPC'S FOR ORDERING & SHIPPING SINGLE MODEL MB1000 Dimensions Weight L 17" x H 4" x W 13" 36 lbs. SINGLE UNIT CARTON Dimensions Weight L 22.25 x H 9.25" x W 17.5" 40 lbs. UPC 050616-008518 3 Year Product Warranty 2 Year Battery Warranty MODEL: MB1000 C US DESIGNED IN USA • MADE IN CHINA LISTED 1690 Corporate Circle, Petaluma, CA. 94954 • 800-472-5555 • 707-283-5900 Fax 707-283-5901 • www.panamax.com L615 REV. B 10/09