Panamax VT4315-PRO Quick Start Guide - Page 1
Panamax VT4315-PRO Manual
View all Panamax VT4315-PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
VT4315-PRO Quick Start Guide VT4315-PRO A BlueBOLT® Enabled Vertical Rack Power Conditioner with12 Outlets HOME THEATER POWER MANAGEMENT Congratulations on your purchase of the Panamax VT4315-PRO BlueBOLT enabled vertical rack power conditioner. The VT4315-PRO is a full featured power conditioner providing protection and filtration for maximum longevity and performance of connected equipment. BlueBOLT enabled, the VT4315-PRO allows remote reboot of 12 outlets in 8 individually controlled banks, as well as the ability to monitor energy use, set alerts, program scheduled commands, and much more. FEATURES • BlueBOLT™ enabled for IP control and monitoring • 12 outlets in 8 controllable banks with wall-wart spacing • Linear Filtration • Protect-or-Disconnect surge protection • AVM Automatic Voltage Monitoring • Reboot button • Coaxial and ethernet signal-side protection • Sleek design ideal for vertical mounting to an equipment rack with included brackets • 8 foot power cord • 15A Capacity with circuit breaker • 3 Year Lmited Product Warranty & $5,000,000 Connected Equipment Protection Policy 8 7 6 5 4 3 2 1 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. WARNING: Do not use this apparatus near water. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. CAUTION - To reduce risk of shock Disconnect VT4315-PRO from power source before servicing any equipment connected to VT4315-PRO. 7. Clean only with dry cloth. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades, with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. Where the power cord is used as the main disconnect device, the disconnect device shall remain readily accessible. 14. This device must be connected to a main socket outlet with a protective earthing (ground) connection IMPORTANT: You will need the VT4315-PRO's unique MAC Address and Challenge Key (provided with the 2 enclosed labels, one attached below). A third label is permanently adhered to the back side of the VT4315-PRO. Attach MAC Address Challenge Key label here. D(C5-T1R2IVGDGCE)R IN ENABLED NETWORK VT4315-PRO RNEESTETWORK COAX 2 10 / 100 / 1000 COAX 1 BlueBOLT POWER ON PROTECTION OK UNSAFE VOLTAGE REBOOT 15A Full instructions online at: www.panamax.com / Products / A/V Components / VT4315-PRO / Manual BEFORE YOU BEGIN UNPACKING Inspect the unit upon receipt. In addition to this Quick Start Guide, MAC Address/Challenge Key labels and the VT4315-PRO, the box should contain the following accessories: MODEL: VT4315-PRO 2 Mounting Brackets 2 Insulation Gaskets 4 Pan Head 4 Nuts and Machine Washers Screws (nylon) 8 Flat Head Machine Screws www.panamax.com 1