Panasonic 20 000lm / SXGA / 3-Chip DLP™ Projector Operating Manual - Page 131
ENGLISH - 131, When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [PC]
View all Panasonic 20 000lm / SXGA / 3-Chip DLP™ Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Chapter 4 Settings - [PROJECTOR SETUP] menu When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set to [OFF] The screen shows the status of the brightness control in one projector. BRIGHTNESS CONTROL STATUS LINK PROJECTOR OFF 5 1 6 MENU RETURN When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set from [GROUP A] to [GROUP D] The screen shows the status of the brightness control of synchronized projectors (up to eight units), including the projector being controlled through the on-screen menu. BRIGHTNESS CONTROL STATUS LINK 1 GROUP A 2 PROJECTOR 192. 168. 30. 2 3 1: PROJECTOR2 192. 168. 30. 3 2: PROJECTOR3 192. 168. 30. 4 3: 4: 4 5: 6: 7: UPDATE 5 7 MENU SELECT 8 When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [PC] BRIGHTNESS CONTROL STATUS MODE PROJECTOR PC 5 1 6 MENU RETURN 1 Display the name of the projector. 2 Display the synchronized group. 3 Display the IP address of the projector. 4 Display the names and IP addresses of projectors in same group detected over the network. 5 Display the status by color. Green: There is an allowance for brightness correction. Yellow: There is little allowance for brightness correction. Red: There is a brightness control error. 6 Display error detailed messages. 7 Display error messages. When the message [Failed to apply BRIGHTNESS CONTROL to some projectors.] appears, it means that synchronization with the projector displayed in red has failed. Press as to select the projector displayed in red, and press the button to display the error details. 8 Update to the latest status information. ENGLISH - 131