Panasonic 20 000lm / WUXGA / 3-Chip DLP™ Projector Operating Manual - Page 34

Chapter 2 Getting Started - Setting up Parts for ceiling mount (optional) The projector can be installed on the ceiling by combining the optional Ceiling mount bracket (Model No.: ET‑PKD520H (for high ceilings), ET‑PKD520S (for low ceilings)) and Ceiling mount bracket (Model No.: ET‑PKD520B (Projector Mount Bracket)). ffBe sure to use the ceiling mount bracket specified for this projector. ffRefer to the Installation Instructions of the ceiling mount bracket when installing and setting up the projector. Attention ff To ensure projector performance and security, installation of the Ceiling mount bracket must be carried out by your dealer or a qualified technician. Projected image and throw distance Install the projector referring to the projected image size and projection distance. Image size and image position can be adjusted in accordance with the screen size and screen position. When the fixed-focus lens (Model No.: ET‑D75LE90) is attached, the projection relation between the screen and the projector differs from that of other lenses. Refer to "For fixed-focus lens (Model No.: ET‑D75LE90)" (x page 35) for details. Projected image SH SD Screen L1 SH L (LW/LT) SW L1 L (LW/LT) Screen SW L (LW/LT)*1 L1 SH SW SD Projection distance Lens protrusion dimension Projected image height Projected image width Projected image size *1 LW: Minimum projection distance when the zoom lens is used LT: Maximum projection distance when the zoom lens is used Projection lens Model No. ET‑D75LE6 ET‑D75LE8 ET‑D75LE10 ET‑D75LE20 ET‑D75LE30 ET‑D75LE40 ET‑D75LE50 Dimension for L1 (approximate value) 0.212 0.254 0.125 0.121 0.121 0.124 0.203 (Unit: m) (Unit: m) 34 - ENGLISH