Panasonic 26PEK2U6 Mini Split Catalog - Page 7
Features
View all Panasonic 26PEK2U6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Features Features Chart ECONAVI dual sensor Detects and reduces waste for more energy savings. ECONAVI mono sensor Room Freeze Protection* Room Freeze Protection mode helps prevent plumbing damage due to sub-Freezing Temperature. This mode automatically turns on the compressor for heat pump operation if the room temperature falls to about 46°F. *This function may not be performed if the unit is not powered, or if the unit is unable to operate such as in protection mode. Please consult with the HVAC installers or professional for details. Microprocessor-Controlled Operation Microprocessor control ensures that the temperature and humidity levels in the room are always comfortable. Wireless Remote Control Panasonic's infrared Remote Control with and easy-to-read LCD Display, gives the user the capability to adjust & set: temperature, sweep (louver control), fan speeds, timer and more, for complete automatic operation. Dry Mode By coupling compressor and fan operation, intermittent operation can be precisely controlled according to room temperature, so that air is efficiently dehumidified. 5 Fan Speeds and Automatic Fan Operation Convenient microprocessor control automatically adjusts fan speed to High, Medium or Low. According to room temperature to maintain a comfortable airflow throughout the room. Air Sweep Control The air sweep function moves the louver up and down in the air outlet, directing air in a "sweeping" motion around the room and providing comfort in every corner. Cool/Dry Mode Flap Heat Mode Louver Control Louver can be manually set to the desired angle by remote control. Base Pan Heater For low ambient products (-15ºF) listed, base pan heater is included to prevent freezing of the outdoor unit during defrost. Automatic Heating and Cooling Changeover After setting the temperature and functions you desire, just relax. If the room temperature is higher than the set temperature, cooling operation begins. If the room temperature is lower than the set temperature, heating operation begins. During normal thermostat cycle operation, cooling and heating operations automatically change in accordance with set temperature, time and room temperature (Single Zone Heat Pump unit only). 1-hour OFF Timer When this button is pushed either while the unit is operating or while it is stopped, the unit will operate for one hour, then switch off automatically. Electric Refrigerant Control Valve The circulation volume of the refrigerant is controlled by a pulse type electric control valve. In order to attain optimum efficiency, when the power is switched ON, the opening degree of the electric control valve is controlled between 90 and 480 steps. Quiet Mode LOW, low fan speed for extra quiet operation. 24-hour Clock with ON/OFF Program Timer The remote control unit allows you to set a wide variety of timer-based operations. Such functions include automatic ON/OFF with a timer setting, same time ON/OFF every day, ON timer, OFF timer and Combination timer. Night Setback Mode for Cooling and Heating Cooling and DRY Mode: With the Night Setback Mode, the air conditioner automatically raises the setting temperature 2°F after 30 minutes, and then another 2°F after the next 30 minutes. Heating Mode: With the Night Setback Mode, the setting temperature is automatically lowered 4°F after 30 minutes, and then another 4°F after the next 30 minutes. This saves energy without sacrificing comfort and is ideal for gentle cooling and heating. In Cooling and DRY Mode 2˚F Automatic Restart Function after Power SteemttpinegraFtuarielure 2˚F Press the 30 min. NIGHT SETBACK button 30 min. Time Setting temperature In Heating Mode 4˚F 4˚F Press the 30 min. NIGHT SETBACK button 30 min. Time Hot Start Heating System Right from the start, air is warm and comfortable. The Hot Start Heating System prevents any cold blasts at the beginning while the heat pump is warming up (Heat pump unit only). Built-In Drain Pump Max. head 20 inches from the discharge of the indoor unit. Condensation pump is only for allowing drain line to meet minimum gravity flow requirements. Filter Sign Filter sign informs you when filter maintenance is necessary. K1/T1/U1/F1 series with CZ-RTC2 XE/E/S series with CZ-RDC516C-1 (Example of CZ-RTC2) Self-Diagnosing Function Units are equipped with Self-Diagnosing Function (methods are difference depending on the models). This makes it easier to diagnose malfunctions, greatly reducing service labor (Wired remote controller). (Example of CZ-RTC2) Anti-microbial Filter Anti-microbial Filter by 3M. This filter is treated to inhibit the growth of mold and mildew, and helps create clean air. Test Comparison Anti-microbialFilter Normal Filter Paper Microbial Growth Rating 7 days 28days No growth No growth 60% growth 60% growth *Tested per ASTM G21-96 Blue Fin Condenser Condensers can take a beating from exposure to salty air, rain and other corrosive factors. Panasonic has extended the life of its condensers with an original anti-rust coating. Tested for 2,000 salt spray hours. 6