Panasonic 4K Integrated Pan/Tilt/Zoom Camera AW-UE70 Operating Instructions - Page 46

Network settings [When using Windows], Installing the software

Get Panasonic 4K Integrated Pan/Tilt/Zoom Camera PDF manuals and user guides View all Panasonic 4K Integrated Pan/Tilt/Zoom Camera manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Network settings [When using Windows] ■■Installing the software Be absolutely sure to read through the "Readme.txt" on the CD-ROM supplied with the unit first before attempting to install the software. Software provided on the CD-ROM ●● Easy IP Setup Software (EasyIpSetup.exe) This software establishes the unit's network settings. For details, refer to the sections that follow. ■■Use the Easy IP Setup Software to establish the unit's settings The settings related to the unit's network can be established using the Easy IP Setup Software supplied. To establish the settings for a multiple number of units, the settings must be selected for each camera involved. If the settings cannot be established using the Easy IP Setup Software, select the settings separately for the unit and personal computer on the network page of the setting menu. For further details, refer to the "Operating Instructions - " (PDF file). Notes ●● If, after the network settings have been established, another device in the same network has the same IP address, the network operations will not be performed properly. Set the IP address in such a way that it does not duplicate an existing IP address. ●● Do not establish network settings from a multiple number of Easy IP Setup Software programs at the same time for a single camera. Similarly, do not perform the "Auto IP setting" operation of the remote camera controller (AW‑RP50 or AW-RP120) at the same time. The IP address settings may no longer be recognized as a result. ●● When you start the Easy IP Setup Software, you may be asked for the administrator account password. ●● To enhance security, the Easy IP Setup Software is designed so that when around 20 or more minutes have passed after the power was turned on, the network settings of the target camera can no longer be configured. It does this to improve the security.  When "20min" is selected for the enable time among the "Easy IP Setup accommodate period". (page 95 in the ) ●● The Easy IP Setup Software cannot be used from a different subnet via a router. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
46
Network settings
[When using Windows]
■
Installing the software
Be absolutely sure to read through the “Readme.txt” on the
CD-ROM supplied with the unit first before attempting to
install the software.
Software provided on the CD-ROM
●
Easy IP Setup Software (EasyIpSetup.exe)
This software establishes the unit’s network settings.
For details, refer to the sections that follow.
■
Use the Easy IP Setup Software
to establish the unit’s settings
The settings related to the unit’s network can be established
using the Easy IP Setup Software supplied.
To establish the settings for a multiple number of units, the
settings must be selected for each camera involved.
If the settings cannot be established using the Easy IP Setup
Software, select the settings separately for the unit and
personal computer on the network page of the setting menu.
For further details, refer to the “Operating Instructions —
<Operations and Settings>” (PDF file).
●
If, after the network settings have been established,
another device in the same network has the same IP
address, the network operations will not be performed
properly.
Set the IP address in such a way that it does not
duplicate an existing IP address.
●
Do not establish network settings from a multiple
number of Easy IP Setup Software programs at the
same time for a single camera.
Similarly, do not perform the “Auto IP setting” operation
of the remote camera controller (AW-RP50 or
AW-RP120) at the same time.
The IP address settings may no longer be recognized
as a result.
●
When you start the Easy IP Setup Software, you may
be asked for the administrator account password.
●
To enhance security, the Easy IP Setup Software is
designed so that when around 20 or more minutes
have passed after the power was turned on, the
network settings of the target camera can no longer be
configured.
It does this to improve the security.
When “20min” is selected for the enable time
among the “Easy IP Setup accommodate period”.
(page 95 in the <Operations and Settings>)
●
The Easy IP Setup Software cannot be used from a
different subnet via a router.
Notes