Panasonic A-200-P A-200-P AE Spec Sheet - Page 1

A&E SPECIFICATION Advidia A-200-P 2MP HIGH SPEED PTZ DOME 1.1 GENERAL A. This product shall be manufactured by a firm whose quality system is in compliance with the ISO-9001. B. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer's system. C. All systems and components shall have been thoroughly tested and proven in actual use. D. All systems and components shall be provided with comprehensive repair and spare parts replacement. The manufacturer on warranty and non-warranty items shall guarantee the spare parts and the repair. E. All systems and components must be in compliance with FCC, CE, UL and RoHs requirements. F. All materials furnished under this item shall be compliant with 802.3 Ethernet standards. 1.2 2MP HIGH SPEED IR PTZ DOME A. The camera shall offer three video streams with up to 2MP resolution, utilizing a progressive scan CMOS imaging sensor. B. The camera shall offer video compression of H.264 and MJPEG. Dual H264 streams shall be supported with independent resolution, bit rate and frame rates for the main and sub streams. C. The camera shall provide true day night, low-light capabilities, with integrated IR cut filter, with sensitivity down to 0.05 lux in color and 0.005 lux in black/white. D. The camera shall be capable of performing firmware upgrades through a network using a software-based device utility or from the web interface. E. The camera shall be equipped with built-in password protection which is not dependent on a server. F. The camera shall provide the ability to take snapshot and record video clips from the web interface and store on the local computer. G. The camera shall support video motion detection with user defined areas and configurable sensitivity levels. In addition, the motion detection shall be supported by an arming schedule with surveillance center notification, email, ftp upload, and alarm output triggered as supported events. H. The camera's web interface shall permit settings to be exported to and imported from a configuration file via the web interface, API and camera manufacturer's client software. I. The camera shall conform to ONVIF and PSIA standards for integration with 3rd party video management systems (VMS). The camera may also support custom firmware for specific integration with a 3rd party VMS. J. The camera shall be compatible with a Video Management Software (VMS) package and Mobile Phone Application from the same manufacturer which is provided free of charge. The VMS shall not be a restricted use version of the manufacturer's full featured version. 1.3 POWER 5120 Woodway, Suite 5006 Houston TX, 77056 | 1