Panasonic A-200-P A-200-P Quick Start Guide - Page 17
Setting the Dome over the LAN
View all Panasonic A-200-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Advidia A-200 5-inch Speed Dome·Quick Start Guide 3 Setting the Dome over the LAN To view and configure the speed dome via LAN (Local Area Network), you need to connect the network speed dome in the same subnet with your PC. Then, install the Advidia Camera Finder Utility to search and change the IP address of the camera. The following figure shows the cable connection of network speed dome. PC Speed Dome Switch Net Figure 3-1 Wiring over LAN NVR Set the IP address of the speed dome for accessing via LAN. Steps: 1. To get the IP address, please use the following method a. Use the Advidia Camera Finder Utility, a software tool which can automatically detect the online Advidia products on the LAN and lists the device's information including IP address, subnet mask, port number, device serial number, device version, etc. 2. Change the IP address and subnet mask to the same subnet as of your PC. 3. Enter the IP address of the network speed dome in the address field of the web browser to view the live video. Notes: The Default value of the IP address is 192.0.0.64. The default user name of the administrator is admin, and the password is 12345 For accessing the network speed dome from the different subnets, please set the gateway for the network speed dome after you log in. For additional instruction on using the Advidia Camera Finder reference the Advidia Camera Finder user guide: http://advidia.com/documentation/AdvidiaCameraFinder.pdf 16