Panasonic A-64 A-64 AE Spec Sheet - Page 1

A&E SPECIFICATION Advidia A64 HD 6 MEGAPIXEL NETWORK OUTDOOR DOME CAMERA TECHNICAL SPECIFICATIONS 1.1 GENERAL A. This product shall be manufactured by a firm whose quality system is in compliance with the ISO-9001 B. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer's system. C. All systems and components shall have been thoroughly tested and proven in actual use. D. All systems and components shall be provided with comprehensive repair and spare parts replacement. The manufacturer on warranty and non-warranty items shall guarantee the spare parts and the repair. E. All systems and components shall have been thoroughly tested and proven in actual use. F. All systems and components must be in compliance with FCC, CE, UL and RoHS requirements. G. All materials furnished under this item shall be compliant with 802.3 Ethernet standards 1.2 HD 6 MEGAPIXEL NETWORK DOME CAMERA A. The network camera shall offer three video streams with up to 6MP resolution (3072 × 2048) in progressive scan CMOS format, with H.264 video compression. B. The network camera shall provide true & day night (ICR) low-light capabilities with sensitivity down to 0.01Lux @(F1.2,AGC ON), 0 Lux with IR & 0.014Lux @(F1.4,AGC ON), 0 Lux with IR C. The network camera shall support Back-Light Compensation (BLC) with selectable zones. D. The camera shall offer video compression of H.264. Three H.264 streams shall be supported with independent resolution, bit rate and frame rates for the main, sub and third streams. E. The network camera shall include embedded Linux OS and support IE and client software for network preview, and be capable of performing firmware upgrades through a network using a software-based device utility or through the web interface. F. The network camera shall be equipped with built-in password protection which is not dependent on a server. G. The network camera shall support standard IT protocols including: TCP/IP,UDP,ICMP,HTTP,HTTPS,DHCP,DNS,RTP,RTSP,RTCP,NTP, SMTP,SNMP,IGMP,IPv6,Bonjour(SIP optional). H. The network camera shall support industry standard Power over Ethernet (PoE) IEEE 802.3af/802.3at for powering the camera over the network in addition to 24VAC/12VDC local power. I. The camera shall support video motion detection with user defined areas and configurable sensitivity levels. In addition, the motion detection shall be supported by an arming schedule with the audible warning, surveillance center notification, email, upload, and alarm output triggered as supported events. J. The camera's web interface shall permit settings to be exported to and imported from a configuration file via the web interface, API and camera manufacturer's client software. K. The camera shall conform to ONVIF, PSIA and CGI standards for integration with 3rd party video management systems (VMS). The camera may also support custom firmware for specific integration with a 3rd party VMS.