Panasonic AG-3DA1 Operating Instructions - Page 86
Before calling for service continued, Playback, Other, The SD Memory Card is - review
View all Panasonic AG-3DA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Before calling for service (continued) Playback Cannot play even when I press the play button. Mosaic-like noise appears when I cue or review a clip. • Is the PB lamp on? If the CAMERA lamp is on, press the POWER/Mode selector switch so that the PB lamp turns on. • Is the recording format correct? Change to a recording format for proper playback. • Are the SD Memory Cards inserted in reverse left-right order? Insert the left and right SD Memory Cards correctly. • This noise is inherent to digital video technology. This is normal. Page 57 Page 80 Page 30 - A black screen appears during clip changeover. Images do not appear on the television even though I have connected the camera-recorder properly. Cannot hear any sound from the camera-recorder's speaker. • When playing back multiple clips in succession, a black screen appears at the changeover between clips. This is normal. • Make sure the input selector on your television is set to video input. Read the television's instructions carefully and select the correct video input connector for the camera-recorder. • Is the 3D setting correct on your television? Read the television's instructions carefully and select the correct setting. • Is the setting for the output terminal correct? Set it correctly on the AV OUT SETUP screen. • You may have turned down the camera-recorder's volume control too far. Adjust the volume level using the AUDIO MON/ADV button +. - - - Page 81 Page 65 Other There is a rattling sound when the camera-recorder is tilted back and forth. A clicking sound is heard when the power is turned on. The SD Memory Card screen appears strange. The SD Memory Card cannot be used even after formatting. The camera does not recognize the SD Memory Card even though it is inserted correctly. The SD Memory Card is not recognized when inserted into other devices. • This is the sound of the lens moving. This is not a fault. No sound should be heard when the camera's power is switched on. • This initialization operation is performed when the camera starts up. It occurs due to the construction of the camera and is not indicative of any trouble. • The data on the card could be corrupted. Data can be corrupted by static electricity and electromagnetic waves. Please always save important data to a computer or other storage media. • There could be a fault with the camera or with the SD Memory Card. Please consult the place of purchase. Always use only SD Memory Cards of 512 MB - 32 GB with this camera. • Was the inserted SD Memory Card originally formatted with a computer? Always use this camera to format SD Memory Cards. Please be aware that, when an SD Memory Card is formatted, all data recorded on the card will be erased and will not be restorable. • Please check that the device is compatible with the capacity or type (SD Memory Card/SDHC Memory Card) of the SD Memory Card that you are using. For details, please consult the device's own operating instructions. - - - - Page 30 Page 17 86