Panasonic AG-AC160A Brochure - Page 8

Versatile Assist Functions Support Comfortable Image Acquisition Expand Function Versatile Focus Assist The AG-AC160A/AC130A feature the Turbo-Speed One-Push AutoFocus to focus an object in less than 0.5 seconds*. The focus bar indicates the focus level, the focus-in-red display shows the focus area, and a new expand function enlarges the center of the displayed image. These three display functions help you to focus quickly and accurately. A face detection function is also provided, and area auto focus and area auto iris are possible. *Focusing time may vary depending on shooting conditions and object. Area Focusing and Area Iris Functions Using the function knob (cursor key), you can select a desired area in the frame and set it as a target zone for focusing, iris adjustment and YGET (brightness measurement). This increases shot-composing flexibility. In addition to the above three Area Function modes, there are two other modes: simultaneous focusing/iris adjustment and simultaneous focusing/YGET. High-Quality Color Viewfinder and LCD The AG-AC160A/AC130A's color EVF uses a 11.43 mm (0.45 inches), approximately 1,226,000 dot-equivalent (852 x 480 x 3 [RGB]) LCOS 7 LCOS Color EVF Color LCD Monitor Waveform Vectorscope (liquid crystal on silicon) display panel. It delivers bright, detailed, high-resolution images and a high response speed. The AG-AC160A/ AC130A's LCD monitor has a 87.63 mm (3.45 inches), approximately 921,000-dot (1920 x 480) high-resolution panel. Simplified Waveform and Vectorscope Display The AG-AC160A/AC130A have Waveform and Vectorscope Display functions for the captured video signal on the LCD monitor. Scene File / User File Use the Scene dial to retrieve an instant set of shooting conditions. Six preset files are provided, and you can change any of the six file names and their settings as desired. One set can be stored internally in the AG-AC160A/AC130A, and four sets on an SD Memory Card. One file with camera setting values can also be stored internally, and four files on an SD Memory Card. Scene File Description F1: - Standard settings F2: FLUO. Indoor shooting under fluorescent lights F3: SPARK Highlighting subjects at receptions, events, etc. F4: B-STR Enhanced gradations of luminance in low light scenes F5: CINE V Cine-Like setting shifted to prioritize contrast* F6: CINE D Cine-Like setting shifted to prioritize dynamic range* *Selecting a scene file does not change the video recording format. If you want to switch to 25p, 24p and 30p, you must do so as a separate procedure. Three User Buttons Three user buttons are provided for one-touch operation of frequently used functions. All buttons are located on the LCD monitor side of the body. Each button can be assigned with any of the following 16 functions: INH, FACE DETECT, WFM, EVF DTL, D.ZOOM, DRS, S.GAIN, ATW, ATW LOCK, SHOT MARK, INDEX, LAST CLIP, BACKLIGHT, SPOTLIGHT, BLACKFADE, WHITEFADE.