Panasonic AG-AC90 Operating Instructions Advanced - Page 107
Messages, Others, Troubleshooting
View all Panasonic AG-AC90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Display Messages Major confirmation/error messages to be indicated on the screen in text. CHECK CARD. This card is not compatible or it cannot be recognized by the unit. If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again. INVALID/CANNOT SET. Since there is a condition to use the function, it is required to cancel/change other settings. Others Troubleshooting ∫ It is not a malfunction in following cases The lens or LCD monitor fog up. ≥ This is due to condensation. It is not a breakdown. Please refer to page 2. A clicking sound is heard when the unit is shaken. ≥ This is the sound of the lens moving and is not a defect. This sound will no longer be heard when the unit is turned on and change the mode to . Object seems to be warped. ≥ Object seems to be warped slightly when the object moves across the image very fast, but this is because the unit is using MOS for the image sensor. This is not a malfunction. Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. This unit cannot be operated though it is turned on. This unit does not operate normally. Power Check points ≥ Charge the battery again to ensure it is sufficiently charged. (l 12) ≥ In cold places, the battery using time becomes shorter. ≥ The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced. ≥ Remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. (Conducting the above operation while the media is being accessed may damage the data on the media.) ≥ If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from. - 107 -