Panasonic AG-DVX200 Operating Instructions - Volume 1 - Page 53
Video input/output, Audio input, TC PRESET IN/OUT terminal
View all Panasonic AG-DVX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Video input/output SDI OUT terminal: BNCk1, 0.8 V [p-p], 75 h, 3G/1.5G HD-SDI, SD-SDI compatible Output format; 1080/59.94p LEVEL-A/50.00p LEVEL-A, 1080/29.97PsF/25.00PsF/24.00PsF/ 23.98PsF, 1080/59.94i/50.00i, 720/59.94p/50.00p, 480/59.94i, 576/50.00i VIDEO OUT terminal: BNCk1, Composite; 1.0 V [p-p], 75 h HDMI OUT terminal: HDMIk1, (HDMI Type A, not compatible with VIERA Link) Output format; 2160/59.94p/50.00p/29.97p/25.00p/24.00p/ 23.98p, 1080/59.94p/50.00p/29.97p/25.00p/ 24.00p/23.98p/59.94i/50.00i, 720/59.94p/50.00p, 480/59.94p, 576/50.00p Audio input Built-in microphone: Supports stereo microphone AUDIO INPUT1/AUDIO INPUT2 terminal: XLRk2, 3-pin Input high impedance, LINE/MIC/MIC_48 V (switch selection) ≥ LINE; _4 dBu/0 dBu (selectable menu) ≥ MIC; `40 dBu /`50 dBu /`60 dBu (selectable menu) Audio output SDI OUT terminal: 2ch (Linear PCM) Gain settings; 0 dB/j6 dB/j12 dB (selectable menu) HDMI OUT terminal: 2ch (Linear PCM) AUDIO OUT terminal: 3.5 mm (0.14 q) diameter stereo mini jackk1 Output level; 600 h, 316 mV Headphone output terminal: 3.5 mm (0.14 q) diameter stereo mini jackk1 Speaker: Round type speaker with a diameter of 20 mm (0.79 q) k1 Other input/output CAM REMOTE terminal: 2.5 mm (0.1 q) diameter super mini jackk1 (ZOOM, S/S) 3.5 mm (0.14 q) diameter mini jackk1 (FOCUS, IRIS) TC PRESET IN/OUT terminal: BNCk1, Used as the input and output terminals ≥ Input; 1.0 V to 4.0 V [p-p], 10 kh ≥ Output; 2.0 V n0.5 V [p-p], low impedance USB HOST terminal: Type A connector, 9-pin, bus power supported In Recording mode; USB2.0 compatible (5 V, 0.5 A) In Playback mode; USB 3.0 compatible (5 V, 0.9 A), used for external media device connection*5 *5 External media device with a capacity of 32 GB or below or a capacity above 2 TB cannot be used USB DEVICE terminal: Type Micro B connector, 10-pin, USB 3.0 compatible, used for the mass storage function (read only) DC input terminal: DC 12 V (DC 11.4 V to 12.6 V), EIAJ type 4 53 SQT1040