Panasonic AG-HMC80PJ User Manual - Page 19

Using the external microphone or audio devices connected to the XLR input terminal

Get Panasonic AG-HMC80PJ PDF manuals and user guides View all Panasonic AG-HMC80PJ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Chapter 1: Operations in AVCHD mode Using the external microphone or audio devices connected to the XLR input terminal Adjust the input level for the internal or external microphone during shooting. 1 Connect the external microphone or an audio device to the XLR CH1/CH2 terminal. • The battery will discharge faster when a phantom microphone is used. • When connecting a device that does not support the + 48 V power supply, set the MIC + 48 V ON/OFF switch to OFF. Setting the switch to ON may cause the connected device to fail. 4 Set the AUDIO IN CH1/CH2 switch to REAR. Audio from the connected device is recorded. CH1 CH2 リワ ヰワ ヤラチヒ ヤラチビ ヤラチビ An external microphone or an audio device 2 Switch the connected audio input signal using the input level select switch. ヰワ ロリワユ ヤラチヒ ヤラチビ ヤラチビ AUDIO IN CH1 CH2 FRONT REAR Set the switch on the connected device to REAR. MIC + 48V ON/ OFF switch Input level select switch LINE: Select when an audio device is connected. The input level is 0 dB. MIC: Select when an external microphone is connected. The input level is -50 dB/ -60 dB. The setting can be changed for MIC GAIN1 or MIC GAIN2 in the setting menu RECORD SETUP screen. (Page 104) 3 Set the input level select switch to + 48 V to use a phantom microphone (a microphone that requires the + 48 V power supply). • + 48 V power is supplied to the XLR input terminal. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
19
Chapter 1: Operations in AVCHD mode
Using the external microphone or audio
devices connected to the XLR input terminal
Adjust the input level for the internal or external
microphone during shooting.
1
Connect the external microphone or an
audio device to the XLR CH1/CH2 terminal.
An external microphone or an audio device
CH2
CH1
2
Switch the connected audio input signal
using the input level select switch.
Input level
select switch
MIC + 48V ON/
OFF switch
LINE:
Select when an audio device is
connected. The input level is 0 dB.
MIC:
Select when an external microphone is
connected. The input level is -50 dB/
-60 dB. The setting can be changed
for MIC GAIN1 or MIC GAIN± in the
setting menu RECORD SETUP screen.
(Page 104)
3
Set the input level select switch to + 48 V to
use a phantom microphone (a microphone
that requires the + 48 V power supply).
+ 48 V power is supplied to the XLR input
terminal.
•
The battery will discharge faster when a
phantom microphone is used.
When connecting a device that does not
support the + 48 V power supply, set the
MIC + 48 V ON/OFF switch to OFF. Setting
the switch to ON may cause the connected
device to fail.
4
Set the AUDIO IN CH1/CH2 switch to REAR.
Audio from the connected device is recorded.
AUDIO IN
CH1
FRONT
REAR
CH2
Set the switch on the connected device to REAR.
•
•