Panasonic AG-HPX370 Brochure - Page 15

Remote Control-Ready The AG-EC4G Extension Remote Control Unit or AJ-RC10G Remote Control Unit* offer both studio use and direct connection to the AG-HPX370 series. This lets you adjust the images and control the camera operation while viewing the monitor. *The AJ-RC10G can control only functions supported by the AG-HPX370 series. It cannot control unsupported keys or dials. AG-HPX370 series 10P Cable (10m/50m) Camera Image Remote Control AJ-RC10G Remote Controller or VBS AG-EC4G Extension Control Unit (ECU) Monitor HD/SD SDI Output Terminals and Down-Converter The AG-HPX370 series comes with two output types: a composite video output and two SDI outputs. In addition to HD-SDI output, the internal down-converter allows high-quality SD video to be output. The aspect mode is selectable. • SDI OUT (HD/SD): Can also output signals with embedded audio. When the AG-HPX370 series are set for HD-SDI output, backup recording operation can be interlinked with the Rec Start/Stop controls of an HD-SDI input-equipped Panasonic recorder, such as the AG-HPG20. The AG-HPX370 series can also output down-converted SD-SDI from an HD source. • VIDEO OUT: Outputs SD (composite) signals. HD signals are downconverted. AG-HPX370 series Analog Composite VIDEO OUT SDI OUT HD-SDI Monitor IEEE 1394 Interface The IEEE 1394-compliant DVCPRO (6-pin) output connector lets you input/output HD/SD compression streams including DVCPRO HD without decoding.* This means you can connect and use a DVCPRO HD VTR or P2 HD recorder for degradation-free backup recording. * Output is not possible in 720p native mode (25pN), Interval-rec, and One-shot rec mode. AVC-Intra is not supported. Text memo, shot mark can not be added in Loop-rec, Interval-rec, or One-shot rec mode. AG-HPX370 series DVCPRO HD IEEE 1394 or (AV Stream) DVCPRO HD Recorder AG-HPG20 P2HD Portable Recorder TC IN, TC OUT, and GENLOCK IN Terminals The AG-HPX370 series has a built-in SMPTE time code generator/reader. TC IN and OUT terminals make time code throughput possible. The GENLOCK IN terminal permits external time-code lock. Other System Functions and Options • UniSlot® wireless receiver compatible (dual or single channel compatible channel) * UniSlot® is a trademark of Ikegami Tsusinki Co., Ltd. • XLR audio input: 2-channel mic/line inputs supporting 48V phantom power supply. • Multiple battery support, including Anton Bauer or IDX batteries*. * The V-mount battery plate is required for IDX batteries. • Equipped with earphone terminal (mini-jack) and speaker. AG-HPG20 P2HD Portable Recorder USB2.0 Interface The AG-HPX370 series standard USB2.0 connector supports both Host and Device modes. In Device mode, a P2 card slot can be used as an external PC device, making it easy to upload data to a nonlinear editing system or network server. In Host mode, an external hard disk drive can be connected to the slot, making it easy to copy data from the P2 card, write data to the card, or view thumbnails of stored video clips. AG-HPX370 series USB 2.0 Upload (DEVICE) File Copy (HOST) NLE HDD Rear terminal Side terminal