Panasonic AG-HPX500 Brochure - Page 10

System and Interface Comes Equipped with IEEE 1394, USB 2.0 and HD SDI Interfaces. Allows Remote Control with the AJ-RC10G. IEEE 1394 Interface The IEEE 1394-compliant DVCPRO (6-pin) output connector lets you output all HD/SD compression streams without decoding.* This means you can connect and use a DVCPRO HD VTR (such as the AJ-HD1400) or Focus Enhancements FireStore FS-100 for degradation-free backup recording. The IEEE 1394 interface also makes it easy to upload data to a Mac-based or PC-based nonlinear editing system. The AG-HPX500 also provides a host mode that lets you copy P2 files to a hard drive without using a PC. * Output is not possible in 720p native mode (24pN 30pN, 25pN). AG-HPX500 Stream (AVC) FOCUS FS-100 IEEE 1394 File transfer (DEVICE) NLE File transfer (HOST) HDD (stand-alone power supply) Compatibility with Nonlinear Editing Systems DVCPRO HD P2 files recorded by the AG-HPX500 can be used in nonlinear editing systems made by a variety of manufacturers, making it possible for you to produce HD content in native DVCPRO HD. And because the AG-HPX500 uses the same recording format as the AG-HVX200 or the AJ-HPX2000/HPX2100, the AG-HPX500 is compatible with nonlinear editing systems that support our other P2HD cameras. *The latest compatibility test report with NLEs is shown at https://eww.pavc.panasonic.co.jp/pro-av/ (P2 compatibility table) HD SDI/SD Down-Conversion Output The AG-HPX500 comes equipped with two BNC video line outputs for flexible monitoring or line recording use. • SDI OUT: Switchable between HD-SDI or SD-SDI (down conversion). HD-SDI output simultaneously backs up recordings to an external digital VTR (such as the AJ-HD1400) in sync with Rec start/stop. • VIDEO OUT: Outputs down-converted SD video (composite). AG-HPX500 VIDEO OUT SDI OUT HD-SDI SD Monitor AJ-HD1400 DVCPRO HD VTR