Panasonic AG-HVX200APJ User Manual - Page 81
Audio dubbing
View all Panasonic AG-HVX200APJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Audio dubbing Background music or narration can be added to the images you have recorded on the tape. 1 Set the POWER switch to ON. 2 In the setup menus, select an audio recording system in RECORDING SETUP screen, AUDIO REC. • For menu operation (Page 97) 32K(12bit): The sound is recorded using the 12-bit/32kHz (4-channel) system. Use this mode when you want keep the sound that recorded while you were shooting even after audio dubbing has been performed. 48K(16bit): The sound is recorded using the 16-bit/48kHz (high-quality stereo) system. When audio dubbing is performed, the sound that was recorded while you are shooting will be erased. 3 Start shooting. 4 Press the mode button to switch to the VCR mode. CAMERA MCR VCR PC DUB 5 In the setup menus, select an audio recording system in the AV IN/OUT SETUP screen, A. DUB INPUT. • For menu operation (Page 97) MIC: The sound of the built-in microphone or the external unit connected to INPUT 1/2 connector is recorded. (Select by CH1 SELECT switch and CH2 SELECT switch.) A_IN: The sound of audio component connected to AUDIO IN/OUT connector (pin jack) is recorded. TAPE 6 Find the scene you want to add and set the unit to the still mode. 7 Press the AUDIO DUB button to establish the status ready for audio dubbing. Press the A. DUB button on the remote control unit. • "A.DUB " appears. 8 Press the button, input the sound and start audio dubbing. When the button is pressed again, the pause mode is established. To resume audio dubbing, repeat steps 7 and 8. • To end audio dubbing while it is underway, press the button. AUDIO DUB button Menu operation controls AUDIO DUB/ THUMBNAIL REC END SEARCH SET MENU PAGE/ AUDIO MON/VAR • Audio dubbing cannot be performed in the LP mode because the track width on the tape is narrower than the head width. (Continued on the next page) Editing 81