Panasonic AG-MSU10 Operating Instructions - Page 25

Operations  Partition type Partition type Features Available functions Thumbnail display Copying cards (P2 card  Storage device) Copying clips P2 card Storage  Storage device device  P2 card Format Type S A special disk format for      high-speed writing/loading data by P2 card. FAT A hard disk whose primary      partition is formatted either using FAT16 or FAT32. The root partition or the "CON- TENTS" folder under any folder*1 is used. P2STORE A P2 Store (AJ-PCS060G)  × ×  × hard disk. Cannot be used for writing data. OTHER A storage device formatted × × × ×  using a format other than those above. • NTFS, HFS+, ext3 or other file system other than FAT16 or FAT32. *1: This enables up to 100 folders in up to three levels. Folders appear in order from the top level. Long file names and two-byte character filenames are not supported. Example: /CONTENTS Can be displayed /SAMPLE/CONTENTS Can be displayed /SAMPLE/20100101/CONTENTS Can be displayed /SAMPLE/20100101/1200/CONTENTS Cannot be displayed  This is the fourth level and will therefore not appear. Selecting Storage Device Before copying, select the storage device you want to copy clips to. The Explore screen and thumbnail screen that appear are those of the storage device selected above. 1 Connect a storage device for copying. 2 Turn the unit on. 3 Press the CHANGE TARGET (F1) button to change destination. • Each press of the button will change the destination drive in the following order. INTERNAL (interface box) USB eSATA  NOTE: • It may take some time (a few seconds) for the unit to recognize the connected storage device and display the related information. 25