Panasonic AGHPG20 AGHPG20 User Guide - Page 68
Panasonic AGHPG20 - P2 GEAR PLAY/REC Manual
UPC - 791871304044
View all Panasonic AGHPG20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Copying data from P cards to the hard drive (continued) Switching to the USB HOST mode 1 Hold down [POWER] for at least 1 second to turn the power on. The thumbnail screen now appears. normal display screen. Hold down [THUMBNAIL/MODE] for at least seconds. The USB HOST mode is now established, and "USB HOST" appears at the bottom of the thumbnail screen. Press [THUMBNAIL/MODE] to display the Press [MENU/MODE CHK]. Using , and , select "OTHER 5 Using press and FUNCTIONS" - "PC MODE SELECT", and press . . , select "USB HOST", and 6 Press [MENU/MODE CHK] twice to display the normal display screen. • Use a hard drive with enough memory to accommodate the data to be copied. To exit the USB HOST mode 1 Hold down [THUMBNAIL/MODE] for at least seconds. The USB HOST mode is cancelled, and "USB HOST" disappears at the bottom right of the screen. Usable hard drives The following hard drive can be used. • Panasonic portable hard disk unit for P2 store (AJ-PCS060G) • Any hard drive which can be connected using USB 2.0 • USB bus power (5 V, 0.5 A) is also supported, but some hard drives cannot be started up using it. If this is the case, supply power from a separate source to the hard drive. • Some hard drives may not operate properly. • Do not use USB memories or other removable media. 6