Panasonic AJHD1800 AJHD1800 User Guide

Panasonic AJHD1800 - VTR DVCPRO HD Manual

Get Panasonic AJHD1800 - VTR DVCPRO HD PDF manuals and user guides View all Panasonic AJHD1800 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AJHD1800 manual content summary:

  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 1
    Operating Instructions Digital HD Video Cassette Recorder Model No. AJ-HD1800P Model No. AJ-HD1800E Before operating this product, please read the instructions carefully and save this manual for future use. F0907T0 -F @ Printed in Japan ENGLISH VQT1H81
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 2
    Read this first! For AJ-HD1800P and AJ-HD1800E _THIS EQUIPMENT MUST BE GROUNDED To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power outlet which
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 3
    operation and maintenance (service) instructions in the literature with the limits for a class A digital device, pursuant to Part 15 of the in accordance with the instruction manual, may cause harmful or foreign Panasonic authorized service center for assistance in selecting an alternate
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 4
    (continued) For AJ-HD1800E Caution for cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. How to replace the fuse 1. Open the fuse compartment with serviceable parts inside. Refer servicing to qualified service personnel. indicates safety information. 4
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 5
    . Install in accordance with the manufacturerÅfs instructions. 8) Do not install near any heat periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 28 Jog Mode 28 Shuttle Mode 28 Manual Editing 29 Preroll 29 Automatic Editing (
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 6
    Contents (continued) Variable memory function 36 Variable memory function selection 36 Outline 36 Variable memory playback operation procedure 36 Variable memory editing operation procedure 37 Function menus 38 General description 38 Allocating the function keys 39
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 7
    50p, 1080/50i or 576i format output signals. By mobilizing highly efficient digital compression technology to assure a high picture quality, this VTR significantly minimizes EX described in the operation manual for our camera recorder. Standard accessories Power cord (AJ-HD1800P) 1 Power cord
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 8
    a 4U digital VTR. Using the rack-mounting adapters (AJ-MA75P: camera in cinema gamma mode for film to an image with film quality. Digital slow motion/dial jog Panasonic's unique digital . UMID information recording and playback This unit supports the recording/playback of UMID (Unique Material
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 9
    No. 025 SYSTEM FREQ. z When the edit mode is selected while the output format is set to other than DVCPRO HD. 8-channel high-sound-quality digital audio The 8-channel PCM audio feature allows for not only independent editing but mixing as well on all 8 channels. One channel is provided for the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 10
    Parts and their functions Front panel (1) POWER switch Audio level meter The audio information is displayed here. z The levels of the CH1, CH2, CH3, CH4, CH5, CH6, CH7 and CH8 PCM audio signals and level of the CUE track signal are displayed here. z The levels of the input signals are displayed
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 11
    MENU No. 776 (REF LEVEL) * This menu is not displayed for AJ-HD1800E. REMOTE buttons and RS-232C display These buttons are used when this ). AUTO OFF lamp This lamp lights when a problem has occurred with the VTR's operation, and details of the problem appear on the time code display. LCD monitor
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 12
    Parts and their functions (continued) Front panel (3) Time code display The data, VTR status information, tape format information or warning information which corresponds to the direct menu buttons appear on this display. (See page 38 and following for details of the displays.) UNITY lamps VIDEO
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 13
    Parts and their functions (continued) Front panel (4) Search button Press this button to shift to the search mode. Set the search dial to the shuttle mode and turn to any position, and then press this button to start playback at the rate set with the search dial. SHTL/SLOW button This is the button
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 14
    initiated with the point where the button was pressed serving as the IN point. PREROLL button This button is used to locate where a transmission or manual editing starts on the tape. When it is pressed, the tape travels to the preroll point and it stops there. When the cue time has
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 15
    selected using setup menu item No.102 (FF.REW MAX). EDIT button This button is pressed together with the PLAY button during playback to initiate manual editing. When the button is pressed in the stop mode, the input signals in the mode selected by the menu or menu can
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 16
    Parts and their functions (continued) Front panel (7) STANDBY button While the head drum is rotating, the button's lamp lights to indicate that the standby ON mode is now established. The same tape tension is applied as in the regular stop mode. If the button is pressed in the stop mode, the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 17
    Parts and their functions (continued) Front panel (8) INPUT CHECK output specifications VIDEO Input selection (MENU 600) INT SG HD SDI SD SDI 1394 Output system HD SDI (MONITOR) SD SDI (MONITOR) LCD (MONITOR) VIDEO OUT3 INT SG* INT SG* HD SDI MUTE (BLACK) MUTE (BLACK) SD SDI INT SG* HD
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 18
    Input selection AES/EBU VIDEO Input selection Output system INT SG HD SDI SD SDI HD SDI (MONITOR) SD SDI (MONITOR) MONITOR L MONITOR R HEAD PHONE L HEAD PHONE R AES/EBU*1 TAPE*2 MUTE AES/EBU*1 MUTE TAPE*2 AES/EBU*1 AES/EBU*1 AES/EBU*1 AES/EBU*1 AES/EBU*1 AES/EBU*1 AES/EBU*1 AES/EBU
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 19
    information are output from the HD SDI MONITOR. For INPUT CHECK, refer to the INPUT CHECK output table on pages 17 and 18. SD SERIAL DIGITAL COMPONENT AUDIO VIDEO IN connector/ACTIVE THRU This is an input connector for SD SDI signals that comply with the SMPTE 259M-C, 272M-A, or ITU
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 20
    reference, input black burst signals must comply with SMPTE170M and ITU624-4. IEEE1394 digital input/output The IEEE1394 digital interface is available for input and output. Use a 6-pin type connector. Bus power is not supported. z Ensure that the connections with other devices are made on
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 21
    SD SDI input (audio, video) HD SDI input (audio, video) Audio monitor outputs HD SDI output (ACTIVE THRU) SD SDI output HD SDI outputs Digital audio inputs Digital audio outputs Source side: Press the "9P 1394" REMOTE button on the front panel for 2 or more seconds to set the VTR to the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 22
    AJ-HD1800 (Source side) HD SDI OUT When a tape recorded with a frame rate of 25/50 fps using a variable frame rate camera MONITOR (SUPER) REF OUT REMOTE IN DIGITAL AUDIO REMOTE OUT REMOTE IN/OUT CONTROL (SUPER) OPTION SDTI IN OUT 1 2 SERVICE ONLY 75h termination ON SD SDI IN Video
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 23
    Connections (continued) Example of connections with an editing controller AV monitor Video monitor signals Recorder Audio monitor signals To REMOTE IN/OUT Remote signals Reference signal Remote signals Editing controller AV switcher Video input signals Audio input signals Video monitor
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 24
    DV and DVCAM cassettes) Use a cassette adapter (AJ-CS455P) when a mini DV or DVCAM cassette It is recommended that tapes bearing the Panasonic brand be used as the consumer-use DV Insert an M/L-cassette between the left/right M/L- cassette guides. z If the cassette slit is exposed to the strong
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 25
    equipment has been connected properly. 1 1 Turn on the VTR's power. 2 Check that the AUTO OFF lamp is off. If condensation or some other problem has occurred, the AUTO OFF lamp lights, and no further operations can be performed. 3 Insert the cassette tape. Without forcing it, insert the cassette
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 26
    Recording 1 Set the accidental erasure prevention tab on the cassette tape to the "REC" position, and insert the tape. 2 Press the STOP button to set the VTR to the stop mode. 3 Select "EE" as the OUTPUT setting using F1 on the menu. EE pictures now appear on the TV monitor. 4 Check that the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 27
    Playback 1 Insert the cassette tape, and set the VTR to the STOP mode. 2 Press the PLAY button. Normal playback commences. 3 Adjust the audio playback levels. Before adjusting the playback levels, check that the PB LED is lighted and that the audio adjustment dial is in the unlocked status. If the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 28
    Jog/Shuttle Jog Mode Shuttle Mode 1 Push in the search dial. Confirm that the JOG lamp lights. 2 Turn the search dial. The dial's click-stops are released, and the tape is played back at the speed corresponding to the speed at which the dial is turned. The maximum jog speed can be changed by
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 29
    Manual Editing 1 Select the editing mode. ASSEM button: Assemble (frame-to-frame continuity) editing is performed using this button. INSERT button: Insert editing is performed using
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 30
    Automatic Editing (deck-to-deck) "Editing" refers to the work involved in using pre-recorded tapes to bring different contents together or delete unnecessary parts and bring together only the necessary parts. The basic editing steps are as follows. 1 Using the REMOTE button, set the player to
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 31
    OUT point. 3. Press the T button again, and input the desired edit point directly using the number keys. Turn the ADJUST dial to move from one digit to the next. 4. Press the ENT button to register the point. To abort the registration at any time, press the C button. To reset a particular edit
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 32
    Automatic Editing (deck-to-deck) (continued) Checking the edit points Modifying edit points 1 Press the IN (or OUT) button to check the edit point. The value of the registered edit point appears on the display. 2 While holding down the IN (or OUT) button, press the PREROLL button to check the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 33
    Automatic Editing (deck-to-deck) (continued) Previewing 1 After the edit points have been registered, press the PREVIEW button. Regular preview is now conducted. z If the edit IN point has not been registered, the position where the PREVIEW button was pressed is registered as the edit IN
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 34
    Audio Split Editing The video edit points and audio edit points can be registered independently, and editing can be executed with the video points offset from the audio points. Audio edit points cannot be registered when the assemble editing mode has been selected. After registering the edit points,
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 35
    Audio Split Editing (continued) _Duration display The duration can be indicated on the display. Between the video IN and OUT points: Press the IN button and OUT button at the same time. Between the audio IN and OUT points: Press the A-IN button and A-OUT button at the same time. Match frame
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 36
    Variable memory function Variable memory function selection The variable memory mode can be selected by setting F6 (VARMEM) on the menu to "ON." When F6 (VARMEM) is set to "OFF," the variable memory mode is canceled, and the regular mode is established. Bear in mind that when
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 37
    Variable memory function (continued) Variable memory editing operation procedure 9 4 6 5 1 83 2 To perform variable memory editing operations, set this VTR, which is connected as the recorder to the variable memory mode, and take the steps below. 1 Select the editing mode on the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 38
    Function menus The function menus are used to set the functions which are frequently used. The function menus are selected directly using the direct menu buttons on the front panel. General description General menus Special menus , The most basic settings for recording,
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 39
    Function menus (continued) Allocating the function keys Menu (6 types) Menu hierarchy HOME VIDEO AUDIO TC PF1 PF2 CUE MULTICUE function DIAG ERROR LOG function MENU ASSEM 1st 2nd (SHIFT) 1st 2nd (SHIFT) 3rd (F+SHIFT) 1st 2nd (SHIFT) 3rd (SHIFT) 1st 2nd (SHIFT) 1st 2nd (SHIFT) 1st 2nd (SHIFT)
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 40
    Function menus (continued) The most basic settings for recording, playback and TC operations are set on this menu screen. Warning mark Name of menu displayed Status display 2 Remaining tape/total tape Operation mode/speed F i press*: When a function button is pressed while the F button
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 41
    Function menus (continued) (continued) Display menu name General menu Special menu Display menu name Description of menu The most basic settings for recording, playback, and time code operation are made. The basic input/output
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 42
    24P This displays the frame 24PA rate (shooting speed) 25P information which is INVALID recorded on a tape shot by a variable frame rate camera. Output reference This displays the output reference status. HD23 HD24 HD25 HD50 HD59 HD60 IN50 IN59 IN60 INT23 INT24 INT25 INT50 INT59
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 43
    Function menus (continued) (continued) Status display 2 Indicator SCH CF DF Description of setting This lights when the SCH phase of the SDREF signal is within the prescribed range. This lights when color framing is locked. This lights during recording or playback in the drop frame mode. <
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 44
    Function menus (continued) (continued) Remaining tape/total tape display The lengths of the remaining tape and total tape of the inserted cassette are displayed in increments of minutes. Example: REM 10/ 64 (10 minutes remaining on a 64-minute tape) Total tape Remaining tape Slight
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 45
    mode other than edit mode. z When using the SD > HD up-converter and HD > HD cross-converter, input the HD tri-level sync signal that supports the HD output format in order to initiate operation using HD_REF_IN. z During SD tape playback, operation is not possible in the 60 Hz mode. z When
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 46
    Function menus (continued) (continued) In the 23.98 Hz/24 Hz mode Input signals REF_IN HD_REF_IN None Playback reference signal HD_REF_IN Complies with HD_REF_IN frequency Internal HD Complies with menu item No.030 frequency In the 25 Hz (HD), 25 Hz (SD), 50 Hz (HD) or 50 Hz (SD) mode
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 47
    . Press the T button. The selected item (cue time or TC) is now highlighted. Turn the ADJUST dial to select TC. Again press the T button. A single digit is highlighted, and the mode for inputting numerical values is established. zThe UBG value and cue time can be registered in the same way
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 48
    Function menus (continued) (continued) Function button/ item Switching method F1 OUTPUT Toggle Setting TAPE EE F2 ___ F3 TC/CTL*2 F4 TC CLR*1 F5 CMP MD ___ Toggle Press ___ TC UB CTL RESET F i toggle NORMAL DARK F6 R INH F1(SHIFT) PREROL F2(SHIFT) ___ F3(SHIFT) OUTREF F4(SHIFT)
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 49
    Function menus (continued) The basic input/output settings for the video signals are set, and the level of the HD output signals can also be adjusted on these menu screens. 1. Video signal input switching, internal signal source type changing, and up-converter aspect ratio conversion Time
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 50
    --100.0% --141.3% No. 663 C LEVEL F5 (SHIFT) Toggle + ADJ HUE (AJ-HD1800P) C PH (AJ-HD1800E) j31.0 --0.0 --+31.0 No. 664 HUE F6 (SHIFT) SUP LV (AJ-HD1800P) Toggle + ADJ j10.0% --0.0% --+10.0% No. 665 SETUP LVL BK LV (AJ-HD1800E) When "CMPNT" is selected as the setup menu item No.650
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 51
    Function menus (continued) The basic input/output settings for the audio signals are set on these menu screens. 1. Audio signal input selection (CH1 - CH4) 3. Audio volume control switching, CUE audio recording signal selection, and audio monitor mix switching SHIFT F1 F2 F3 F4 F5
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 52
    Function menus (continued) (continued) Function button/ item Switching method F1(SHIFT2) VOLUME Toggle Setting REC PB AUTO F2(SHIFT2) ___ F3 (SHIFT2) RECCUE ___ Toggle F4 (SHIFT2) ___ F5 (SHIFT2) ___ F6 (SHIFT2) M MIX ___ ___ Toggle ___ CUE CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH1+2
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 53
    Function menus (continued) The TC-related settings are performed on these menu screens. Whether the TC is to be superimposed onto the display can also be set on this screen. SHIFT F1 F2 F3 F4 F5 F6 SHIFT F1 F2 F3 F4 F5 F6 Function button/ item Switching method F1 TC SRC Toggle
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 54
    Function menus (continued) A maximum of 60 cue points can be set on these menu screens. When "AUTO" has been selected as the F3 (PAGE) setting on the AUTO PAGE mode menu, up to 10 pages of cue points with 6 cue points on each page can be managed on a page-by-page basis. The 60 cue
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 55
    cue points by number 1. Turn the ADJUST dial to highlight the desired registered point display area 2. Press the T button twice. Only the "10's" hour digit of the selected cue point is now highlighted, and the change enable status is established. When "REV" has been selected as the setup menu
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 56
    Function menus (continued) (continued) Search operations Turn the ADJUST dial to highlight the desired registered point. When the PREROLL button is pressed, the preroll operation is initiated. The tape will not be prerolled if no cue points have been registered. Since the tape is not
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 57
    Function menus (continued) This enables confirmation of information such as the warning/hour-meter/UMID. Verification, deletion of the error log file, retention/call to the SD memory card can do with the SHIFT picture. Warning mark SHIFT F1 F2 F3 F4 F5 F6 Warning display When a
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 58
    Function menus (continued) (continued) Function button/ item Switching method F1 ___ WARN F2 ___ HOURS F3 ___ UMID F4 DIF1 F5 DIF2 F6 ___ F1 (SHIFT) STEP F2 (SHIFT) CARD F3 (SHIFT) ___ ___ ___ ___ Toggle FiPress ___ F4 (SHIFT) ___ F5 (SHIFT) AL CLR ___ FiPress F6 (SHIFT) ___
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 59
    Function menus (continued) These enable movement to the menu screens for operations (adjustments, saving data onto or loading it from the internal memory or SD memory cards) relating to the SYSTEM and SETUP menus. SHIFT F1 F2 F3 F4 F5 F6 SHIFT F1 F2 F3 F4 F5 F6 Function button/
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 60
    menu screen. IN point OUT point SHIFT F1 F2 F3 F4 F5 F6 Automatic editing and manual editing z When the editing mode has been selected (the ASSEM button is lighted), automatic editing or manual editing can be performed even after the ASSEMBLE screen has been exited. z After the edit IN
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 61
    IN and OUT points have been registered, the IN and OUT buttons light. Automatic editing and manual editing z When the editing mode has been selected (the INSERT button is lighted), automatic editing or manual editing can be performed even after the INSERT screen has been exited. z After the edit IN
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 62
    Function menus (continued) When the SETUP MENU or SYSTEM MENU opera-tion menu is selected, a menu list appears on the monitor, and the respective items can be set. SETUP menu Change mark SHIFT F1 F2 F3 F4 F5 F6 SYSTEM menu Change mark SHIFT F1 F2 F3 F4 F5
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 63
    Function menus (continued) (continued) Flow of setting changes Press SHIFT. Submenu Press the ADJ dial. Change the setting Open the screen. Close the screen. F6 (EXIT) Select the menu item Press the ADJ dial. Turn the ADJ dial. F + F4 (item reset) Change the setting
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 64
    are also transferred at the same time.) 4 Editing the title of the selected file Press the ADJ dial after selecting the operation file. The first digit of the title display area is highlighted, and the file title can be edited. z To input a number, press the number keys. z To input letters, tap
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 65
    Function menus (continued) Settings 5 File overwrite inhibit facility It is possible to lock the overwrite inhibit facility for individual files in VTR MEMORY 1 to 4 . Select the file to be locked, and press F5 (LOCK) to lock it. If F5 (LOCK) is pressed again, the facility is unlocked. The locked
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 66
    Function menus (continued) Up to 24 frequently used setup menu items can be registered. The items are registered on the function menus shown below. (No settings have been registered before the VTR leaves the factory.) To display one of the function menus, press F1 (PF1 FT), F2 (PF1 BK),
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 67
    Function menus (continued) (continued) Flow of function button registration Open the screen. Close the screen. F6 (EXIT) Press the ADJ dial. Select the function button to be registered. Turn the ADJ dial. F4 (one button reset) F + F4 (all buttons reset) F5 (settings entered) Press the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 68
    Function menus (continued) (continued) PF1/PF2 function button names When SETUP menu items have been registered in the function buttons, the names of these function buttons are displayed as set forth in the table below. Setup menu item No. Name of setup menu item Function button name
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 69
    LVL (SD) BK SD 662 V LEVEL V LV 663 C LEVEL C LV 664 HUE (AJ-HD1800P) HUE (AJ-HD1800P) C PHASE (AJ-HD1800E) C PH (AJ-HD1800E) 665 SETUP LVL (AJ-HD1800P) SUP LV (AJ-HD1800P) BK LVL (AJ-HD1800E) BK LV (AJ-HD1800E) 670 BRIGHTNESS BRIGHT 671 COLOR LEVEL COLOR 672 CONTRAST CNTRST 673
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 70
    PB ATT DV ATT 760 REC PT MUTE R PTMT 761 AUDIO INT SG A INSG 762 AUD RATE CON A RC 763 METER SCALE M SCL (Only AJ-HD1800P) (Only AJ-HD1800P) 776 REF LEVEL REF LV 785 IN IMP CH1SL IMP A1 786 IN IMP CH2SL IMP A2 787 IN IMP CH3SL IMP A3
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 71
    Function menus (continued) Different kinds of settings and information can be stored or retrieved from an SD memory card. When F2 (CARD) is pressed on the screen while the F button is held down, the function menu shown below is displayed. [MENU/ERROR LOG/MULTI CUE] Memory selection
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 72
    file First select the operation file, and then press the ADJ dial. The first digit of the title display area is highlighted, indicating that the file title can now allocated to each number key. z Press the ADJ dial to move from one digit to the next on the title display area. z To enter the title,
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 73
    Function menus (continued) (continued) 5 File overwrite inhibit facility The file lock prevents the files on an SD memory card from being overwritten. z Locking a file Select the file to be locked, and press F5 (LOCK). z Unlocking a file Press F5 (LOCK) again. The locked or unlocked
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 74
    Function menus (continued) Using the front panel controls and on-screen menus, functions are registered into the input pins of the parallel remote (50PIN) connector and the statuses are registered into its output pins. When F5 (50P IN) or F6 (50P OT) is pressed while the F
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 75
    Function menus (continued) (continued) Registering functions in the input pins/Active inputs Registering functions in the output pins/Active outputs 1 Selecting the 50-pin connector pins Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 76
    Function menus (continued) (continued) Special OUT menu list No. SUPER Description of setting DISPLAY C00 EJECT status EJECT C01 STANDBY ON status STBY ON C02 CUE-UP completed status CUE C03 STILL status STILL C04 Status in which the front panel STOP button is
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 77
    Function menus (continued) (continued) The statuses established by a multiple number of pins in the special OUT menu list are displayed. Pin status "1" signifies "active low" and "0" signifies "open." Error statuses C22 C23 C24 ERR0 ERR1 ERR2 Error status 0 0 0 SERVO NOT
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 78
    Function menus (continued) (continued) Flow of registration Open the screen. Close the screen. F6 (EXIT) Press the ADJ dial. Status in which selected 50-pin connector pin menu item selection is enabled Turn the ADJ dial. F1 (forward page scroll) F2 (reverse page scroll)
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 79
    Function menus (continued) (continued) 50-pin assignment factory settings Pin no. I/O Setting item 1 I REC 2 I PLAY 3 I FF 4 I REW 5 I STOP 6 I __ 7 I __ 8 I 422 REMOTE ON 9 I 422 REMOTE OFF 10 I LOCAL ENABLE 11 I EJECT 12 I IN SET 13 I REC INH ALL
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 80
    the power off. z For the IEEE 1394 digital output, settings are disabled in this menu. For controller and setup menus. Use the AJ-ER50, an optional accessory, as the external MT-2000 (manufactured by Musashi and recommended by Panasonic) as the external encoder remote controller. However,
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 81
    System menus (continued) No./Item 12 SYS H (HD)*UP 14 SYS SC (SD)*DW 15 VO SYS H (SD)*DW 16 SD SYS H (SD)*DW Description of setting For adjusting the HD SDI output system phase in 13.5nS steps. j: To advance the phase. i: To delay the phase.
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 82
    A state selecting 6 (50 (SD)) For the procedure to shift the system frequency, refer to page 112. *2The asterisk denotes the factory setting for AJ-HD1800E. No./Item Description of setting 26 For selecting the output whose HD output phase is to be advanced by 90H in relation to HD
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 83
    Setup menus No./Item 000 P-ROLL TIME 001 LOCAL ENA 002*1 TAPE TIMER 003 REMAIN SEL Description of setting For setting the preroll time. Any time from 0 to 30 seconds can be set in 1-second increments. 0000 0s : : 0005 5s : : 0030 30s z During automatic editing (PREVIEW
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 84
    type for the superimposed displays and for the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors and superimposed indications from the IEEE 1394 digital interface as well as for the SETUP MENU, etc. 010*1 MONI CONTROL 0000 WHITE White characters on a black background. 0001 W/OUT White
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 85
    is retained as is even if the format recorded on the tape is changed unless the playback mode is released. For selecting the format when "MANUAL" has been selected as the setup menu item No.022 (PB FORMAT) setting. If "AUTO" is selected as the setting, the format when playback starts
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 86
    Setup menus (continued) (continued) Formats in which the tape is played back 022: PB FORMAT MANUAL AUTO 020: SYS FORMAT 1080i 720p -------- 023: FORMAT SEL HD_LP HD_SP 50M 25M DV DVCAM HD_LP HD_SP 50M 25M DV DVCAM -------- Playback format DVCPRO HD-
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 87
    Setup menus (continued) No./Item Description of setting 100 For selecting the direct search dial operation. SEARCH ENA 101 SHTL MAX 102 FF. REW MAX 104 REF ALARM 0000 DIAL Direct search dial operations are performed. 0001 KEY Unless the search button is pressed, the mode does not
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 88
    Setup menus (continued) (continued) No./Item 111*1 MEMORY STOP 112 FRZ MODE SEL Description of setting For selecting whether to automatically stop the VTR when the counter value is at the "0" position during CTL mode FF and REW operations. 0000 OFF The VTR does not stop. 0001
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 89
    for the time code. 0000 NORMAL The time code is input starting with the left-most digit. 0001 REV The time code is input from the high-order digit but is displayed from the right-most digit. For selecting whether the LCD monitor display on the front panel is to be turned on
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 90
    information of a VTR other than DVCPRO 0001 DVCPRO For setting the ID information of the DVCPRO 0002 ORIG Set only for connecting with the Panasonic controller (AG-A850, optional). For selecting whether the RS-232C connector is to function. 0000 OFF The RS-232C connector does not function
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 91
    . Regardless of the settings in Setup Menu No. 140 (OUTPUT), simultaneous playback is always performed during editing. For selecting how to connect the digital audio edit IN points. AUD EDIT IN 304*1 0000 CUT Cut processing 0001 FADE V-fade processing For selecting how to connect the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 92
    of the channels for the analog audio presets of a controller when a controller without a function to control the edit presets of the digital audio signals is used to edit the digital audio signals of the VTR. The VTR's CH1 edit presets are set to ON or OFF following the analog audio signals
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 93
    Setup menus (continued) No./Item 400 STILL TIMER Description of setting For selecting the duration of the time taken after the VTR is left standing in the STOP or search STILL mode (JOG, SLOW or SHTL) before the tape protection mode is established. (Units: s = seconds, min =
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 94
    SLTC EXT_L SVITC VITC z When [1394] is selected in Setup Menu No. 600 (VIDEO IN SEL), the time code input for the IEEE 1394 digital input/output connector is used. However, the VITC information is not superimposed on the video signal during EE mode and when recording. Furthermore, LTC
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 95
    Setup menus (continued) (continued) No./Item Description of setting 508*1 For setting how the user bits of the time code generated by the TCG is to be used. BINARY GP 509 PHASE CORR 510*1 0000 000 NOT SPECIFIED (no character set specified) 0001 001 ISO CHARACTER (8-bit character
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 96
    The serial video signal which has been input to the HD SDI IN connector is selected. 0003 1394 For selecting the compressed digital signals input to the DV connector (digital video interface). In this case, the audio input signals are also signals from the DV connector. 0004 SD SDI For selecting the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 97
    Setup menus (continued) (continued) No./Item 623 D/C RESP V 624*2 U/C RESP H 625*2 U/C RESP V 626 D/C ENH H 627 D/C ENH V Description of setting For selecting the vertical frequency band during down-conversion and line conversion (1080i 720p). 0000 WIDE 0001 STD For selecting the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 98
    the component style 0001 CMPST Level adjustment mode for the composite style 651*3 HUE STYLE (SD)*DW * The asterisk denotes the factory setting for AJ-HD1800E. For selecting the rotational axis of the chroma phase adjustment. 0000 Pb-Pr The axis rotates in a perfect circle on the SDI (component
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 99
    chroma level of HD SDI, SD SDI, and analog composite output (j ʿ to 0 dB to i3 dB) 664 HUE (AJ-HD1800P) C PHASE (AJ-HD1800E) 665 SETUP LVL (AJ-HD1800P) BK LVL (AJ-HD1800E) 670 BRIGHTNESS 671 COLOR LEVEL 0000 0.0% : : 1000 100.0% : : 1413 141.3% This setting takes effect when "CMPST
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 100
    (F1) BLANK *DW 681*1 CC (F2) BLANK *DW 682 VO SETUP (HD)*UP (This menu is not displayed for AJHD1800E.) 683 VO SETUP (SD)*DW (This menu is not displayed for AJHD1800E.) 684 EDH (SD)*DW Description of setting For adjusting the contrast of the LCD monitor on the front panel. 0000
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 101
    video images shot with the cine gamma FilmREC mode of the Varicam to images of film quality (equivalent to Telecine 6 of HD Gamma Corrector in AJ-GBX27G). 0003 GAMMA3 This converts video images shot with the cine gamma FilmREC mode of the Varicam into the Cineon curve appropriate for film recording
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 102
    Setup menus (continued) (continued) No./Item Description of setting 695*1 BLANK LINE For selecting ON or OFF for blanking for the vertical blanking period of the video signals during SD tape playback. 0000 BLANK All the lines are forcibly blanked 0001 THRU None of the lines are
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 103
    No.722 (D IN SEL 34). For selecting the CH5 input signal. CH5 IN SEL 718*1,2 0000 INT SG The internal signal is selected. 0001 DIGI Digital input signals are selected. 0002 ANA Analog input signals are selected. (CH1 input) When DIGI has been selected, whether serial or AES is selected
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 104
    the audio signal becomes the HD SDI signal. For selecting the CH3 and CH4 digital input signals. 0000 AES AES/EBU 0001 SDI Serial When INT SG the audio signal becomes the HD SDI signal. For selecting the CH5 and CH6 digital input signals. 0000 AES AES/EBU 0001 SDI Serial When INT SG
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 105
    Setup menus (continued) (continued) No./Item 729*1,2 REC CH5 730*1,2 REC CH6 731*1,2 REC CH7 Description of setting For selecting the input signals to be recorded on the audio CH5 track. 0000 CH5 Audio input CH5 signals 0001 CH6 Audio input CH6 signals 0002 CH7 Audio input CH7 signals
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 106
    Setup menus (continued) (continued) No./Item 734*1 PB FADE Description of setting For selecting how to process the audio edit points (IN points and OUT points) during playback. 0000 AUTO The status established during recording is followed. 0001 CUT Forcibly cut 0002 FADE Forcibly
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 107
    Setup menus (continued) (continued) No./Item 745 CH8 CUE SEL 746 Description of setting For selecting the CH8 output status of the main signal line in the search mode. 0000 OFF The CUE signal is not output. 0001 ON The CUE signal is output. For details on the audio output
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 108
    input/output section (without engaging the digital filter). 763 METER SCALE (This menu is not displayed for AJHD1800E.) 776 0000 OFF The signals are 18* ʔ 18 dB 0002 FS-12 ʔ 12 dB * The asterisk denotes the factory setting for AJ-HD1800E. *1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or the
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 109
    Setup menus (continued) (continued) No./Item 785*1 IN IMP CH1SL 786*1 IN IMP CH2SL 787*1 IN IMP CH3SL Description of setting For setting the impedance of analog audio input (CH1) 0000 600 600 ≠ 0001 HIGH High impedance For setting the impedance of analog audio input (CH2) 0000 600 600 ≠
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 110
    is forcibly returned. 0002 DV DV is forcibly returned. 0003 AUTO The reply is the same format as the signal format output from the IEEE1394 digital interface. When the unit is connected to a non-linear editing system using 50M, 25M, and DV signal format, the non-linear editing system may
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 111
    Setup menus (continued) No./Item A02 P. ON LOAD Description of setting This VTR is equipped with VTR MEMORY C for storing the current settings (All of the set values in the SETUP MENU, the contents of the registered items in the PF1/PF2 menu, some of the contents of the function buttons)
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 112
    system menu items affected by the change will be updated, as will the associated file names. No.25 SYSTEM FREQ Format enabling recording 59/60 1080/59.94i (HD_LP) 720/59.94p (HD_LP) 720/60.00p (HD_LP
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 113
    Setup menus (continued) The system menu and setup menu have some items whose settings differ and other items with which no selection options are displayed and whose settings are fixed, depending on the switching of the operation mode in
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 114
    Setup menus (continued) NO. Menu item 015 AUTO STEP 020 SYS FORMAT 022 PB FORMAT 023 FORMAT SEL 030 HD FREQUENCY 031 OUT REF 100 SEARCH ENA 101 SHTL MAX 102 FF. REW MAX 104 REF ALARM 105 AUTO EE SEL 106 EJECT EE SEL 107 EE MODE SEL 108 PLAY DELAY 109 CAP. LOCK 110 AUTO REW 111 MEMORY STOP 112 FRZ
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 115
    Setup menus (continued) NO. Menu item 312 POSTROLL TM 313 CLICK POINT 320 EDIT RPLCE1 321 EDIT RPLCE2 322 EDIT RPLCE3 323 EDIT RPLCE4 324 EDIT RPLCEC 400 STILL TIMER 401 SRC PROTECT 402 DRUM STDBY 403 STOP PROTECT 500 VITC BLANK 501 VITC POS-1 502 VITC POS-2 503 TCG MODE 504 RUN MODE 505 TCG
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 116
    Y LVL (SD) 659 Pb LVL (SD) 660 Pr LVL (SD) 661 BK LVL (SD) 662 V LEVEL 663 C LEVEL 664 HUE (AJ-HD1800P)/C PHASE (AJ-HD1800E) 665 SETUP LVL (AJ-HD1800P)/BK LVL (AJ-HD1800E) 670 BRIGHTNESS 671 COLOR LEVEL 672 CONTRAST 673 BACKLIGHT 676 BLK CLIP 680 CC (F1) BLANK 681 CC (F2) BLANK
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 117
    CH4 SL 758 JOG PROC 759 DV PB ATT 760 REC PT MUTE 761 AUDIN INT SG 762 AUD RATE CON 763 METER SCALE (Only AJ-HD1800P) 776 REF LEVEL 785 IN IMP CH1SL 786 IN IMP CH2SL 787 IN IMP CH3SL 788 IN IMP CH4SL 789 IN IMP CUE SL
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 118
    on the display and superimposed display. TCR 00 : 07 : 04 : 23 Hours Minutes Seconds Frames User bits The "user bits" refers to the 32-bit (8-digit) data frame among the time code signals which has been released to users. It enables operator numbers and other values to be recorded. The alphanumerics
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 119
    Time code and user bits (continued) Setting the external time code 1 Set the VTR to the stop mode. 2 Set F3 TC/CTL on the menu to TC. 3 If the video input has been set to HD SDI input or INT SG, set F1 TC SRC on the menu to EXT-L, SLTC or SVITC. 4 If the video input has been set to SD
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 120
    video signal INT Internal TCG value (refer to the table 1) SD SDI VITC *3 of the input video signal 1394 Time code for the IEEE 1394 digital input (VAUX area) INT SG Not recorded EXT_L HD SDI SD SDI Time code for the TIME CODE IN connector input *1 (refer to the table
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 121
    Time code and user bits (continued) Time code recorded on the unit Table 1 Menu Time code to be recorded No.503 TCG MODE REGEN PRESET AUTO No.505 TCG REGEN TC&UB TC UB --- TC&UB TC UB No.506 REGEN MODE --- AS&IN ASSEM INSRT AS&IN ASSEM INSRT AS&IN ASSEM INSRT At the time of normal recording
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 122
    Superimpose screen The control signals, time code, etc. are displayed on this screen using abbreviations. TV monitor Characters displayed The background of the characters superimposed on the display screen can be changed using F5 (C TYPE) on the menu. TCR TCR TCR Abbreviations
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 123
    can be selected but CH1 + CH2 + CH4 cannot be selected.) MONITOR SELECT switches Number keys Display saving function This function is provided to extend the service life of the LCD monitor. It starts up if none of the front panel controls have been operated or the cassette tape has not been
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 124
    used. (The complete slide rail and bracket unit is not available from Panasonic.) For further details, consult your dealer. 1 Attach the inner members of member is screwed into place A BC DE F GH 4 Attach the AJ-MA75P rack-mounting adapters using the same four screws. Rack-mounting adapters 5
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 125
    the video heads be cleaned as and when appropriate. For further details on how to actually clean the heads, consult with one of Panasonic's service companies or with your dealer. Condensation Condensation occurs due to the same principle which is involved when droplets of water form on a window
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 126
    Error messages When a warning occurs in this VTR, the warning lamp lights up. When the DIAG menu is opened, a description of the warning will appear on the front panel LCD area and TV monitor. Also, when an abnormal operation is detected in this VTR, the AUTO OFF lamp lights up, and a message
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 127
    by your dealer when maintenance or other work is performed. Priority Higher Lower Display and description Error messages (see error message table): When any problem arises with the VTR's operation, the AUTO OFF lamp lights, and an error message is displayed. INT SG: If, when "INT SG" has been
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 128
    1X 100M SIG This is displayed when the signal input into the IEEE 1394 digital interface is not at the 1X transfer speed in DVCPRO HD (100 Mbps) continues. z Check the tape. If a tape recorded using a variable frame rate camera is to be played back in this VTR, the time code must be recorded in
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 129
    display blinks. VTR: Stops. z Set the POWER switch to OFF and then back to ON again. When the servo microcomputer does not follow the instructions of the system control microcomputer even after 10 seconds have elapsed, the AUTO OFF lamp lights, and the message display blinks. VTR: Stops. z Set
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 130
    Error messages (continued) Error messages (continued) Display E-51 FRONT LOAD ERROR E-52 W-UP REEL NOT ROTA E-53 WINDUP ERROR E-55 UNLOAD ERROR E-57 S-FF/REW TIMEOVER E-59 DRUM ROTA TOO SLOW E-60 DRUM ROTA TOO FAST E-61 CAP ROTA TOO SLOW E-64 S REEL ROTA TOO FAST E-67 T REEL ROTA TOO FAST z
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 131
    menu item No.209 (RETURN ACK). Hardware specifications External interface specifications z Connector pin specifications Connector: D-SUB 25-pin (crossover cable supported) Pin No. 1 2 3 4 5 6 7 20 Signal FG RXD TXD CTS RTS DTR SG DSR Description Protective ground (frame ground) Received data
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 132
    STOP BIT Parity bit No.208 PARITY ACK code No.209 RETURN ACK 2.Send format [controller (PC) > VTR] The following responses are for command instructions. Multiple responses may be made if necessary. _Data format [STX] 02h [command] XX XX XX [:] [data] [ETX] 3Ah XX.....XX 03h 20H
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 133
    (data) [ACK] [STX] OPL [ETX] _When the communication has ended unsuccessfully [NACK] 15h _When processing is not possible due to incorrect data or problem with the VTR 1.The receive completion message is returned. [ACK] 06h 2.An error code is returned. [STX] 02h [E R N1 N2 N3] error code
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 134
    RS-232C interface (continued) 5.Command table _Commands relating to operation control z As the return (completion) message, [ACK] is returned when data is received, and only the execution message which is subsequently returned is listed in the table. z If a command not listed in the table
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 135
    ) PREROLL OBF: STAND BY OFF OSF: SHTL FORWARD OSR: SHTL REVERSE OJG: JOG FORWARD/REVERSE OSW: VAR FORWARD/REVERSE EAE: AUTO EDIT EON: EDIT ON (MANUAL EDIT) EPV: PREVIEW ERV: REVIEW [STX] QID [ETX] ˡˠ [STX] data [ETX] This command is for inquiring about the VTR used. data =AJ-HD1800 135
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 136
    RS-232C interface (continued) _Microsoft QuickBASIC sample program CLS STX$ = CHR$(&H2): ETX$ = CHR$ (&H3): NAK$ = CHR$(15): ACK$ = CHR$(&H6) PRINT "*** RS-232C COMMUNICATION SAMPLE PROGRAM ***" PRINT "Type Command 'QUIT' to quit." PRINT REM *** Communication Port Initial & Open *** REM Port 1,
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 137
    CH1, CH2, CH3, CH4) BNC k 1, active-through (BNC k 1) BNC k 1, active-through (BNC k 1) XLR k 1 XLR k 1 AUDIO OUT AUDIO OUT (DIGITAL) AUDIO OUT (ANALOG) HD SERIAL OUT (DIGITAL) SD SERIAL OUT (DIGITAL) CUE OUT TIME CODE OUT MONITOR OUT HEADPHONES (FRONT) BNC k 4 (CH1/CH2, CH3/CH4, CH5/CH6, CH7/CH8
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 138
    (page 74) for the connection pin signals. RS-232C (D-SUB 25-pin, crossover cable supported) Pin No. 1 2 3 4 5 6 7 20 Signal FG RXD TXD CTS RTS DTR REMOTE CONTROL PROTOCOL TRANSMIT EMERGENCY EJECT Procedure to ejecting the tape manually in an emergency If the cassette tape fails to be ejected
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 139
    (max. 17-3/16 inches) a 6-15/16 inches a 16-7/16 inches (not including supporting feet, jacks and connectors, JOG dial and fan) Weight: 19.5 kg (43.0 lb) XL cassette is used and d100a speed is selected) Search speed: d100a Digital slow: j1k to i2k (when playing back tapes recorded using the DVCPRO
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 140
    , composite output chroma gain: - to +3 dB HD/SD SDI, composite output chroma phase *1: d30x HD/SD SDI, composite output setup: d10% z System phase HD serial digital output system phase 1080i: d1.0H (13.5 nS step) 59.94/60 Hz :d2200 Sample 50 Hz :d2640 Sample 23.98/24 Hz :d2750 Sample
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 141
    ] 3.5-inch LCD color monitor, 21 megapixels (4:3 aspect ratio) [OPTIONAL ACCESSORIES] Rack-mounting adapters: AJ-MA75P [ACCESSORIES] Power supply cord k 1 (AJ-HD1800P) Power supply cord k 2 (AJ-HD1800E) Inrush current, measured according to European standard EN55103-1: 10.4 A (240 V) Weight and
  • Panasonic AJHD1800 | AJHD1800 User Guide - Page 142
    . Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
F0907T0 -F
@
Printed in Japan
VQT1H81
Digital HD Video Cassette Recorder
Operating Instructions
Model No.
AJ-HD1800E
Before operating this product, please read the instructions carefully and save this manual for future use.
ENGLISH
Model No.
AJ-HD1800P