Panasonic AJHD1800 AJHD1800 User Guide - Page 85
PB FORMAT setting., If AUTO is selected as the setting, the format
View all Panasonic AJHD1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Setup menus (continued) (continued) No./Item 022 PB FORMAT 023 FORMAT SEL Description of setting For selecting the format in which the tape is to be played back. 0000 MANU The format is determined by the setting selected for setup menu item No.023 (FORMAT SEL). 0001 AUTO1 The unit follows the format recorded on the tape. Whenever the format is changed during playback, the playback format switches to others according to the changed format. 0001 AUTO2 If the playback format does not change for 1 second or more after the SERVO lamp lights when starting playback, the current playback format is fixed. The fixed playback format is retained as is even if the format recorded on the tape is changed unless the playback mode is released. For selecting the format when "MANUAL" has been selected as the setup menu item No.022 (PB FORMAT) setting. If "AUTO" is selected as the setting, the format when playback starts is selected, and when the tape is played back, the format is automatically detected and matched with the format of the playback tape. 030*1 0000 HD-LP The DVCPRO HD-LP format is selected, and the setup menu item No.020 (SYS FORMAT) setting is followed. 0001 HD-SP The DVCPRO HD format is selected, and the setup menu item No.020 (SYS FORMAT) setting is followed. 0002 422 The DVCPRO50 (422) format is selected. 0003 411 The DVCPRO (411) format is selected. 0005 DV The DV format is selected. 0006 DVCAM The DVCAM format is selected. For setting the field system frequency HD FREQUENCY 0000 59/23 The 59.94/23.98 Hz frequency is set. 0001 60/24 The 60/24 Hz frequency is set. z The set field frequency is enabled only when there is no input for the OUT REF settings. If there are any corresponding inputs, the field frequency coincides with the field frequency of the input. z When the HD SDI output is output with 60 Hz/24 Hz, the SD SDI is output as NO SYNC, and the analog composite is output in the White/Black mode (burst off). No./Item 031*2 OUT REF Description of setting Video output reference 0000 AUTO When the HD REF input signal is supplied, it is used as the reference. If it is not supplied but the SD REF input signal is supplied, the SD REF signal serves as the reference instead. If neither the HD REF nor SD REF input signal is supplied, the HD serial signal serves as the reference. If none of the HD REF, SD REF and HD serial signals are supplied, the internal sync signal serves as the reference. 0001 INPUT When the serial input signal is supplied, it is used as the reference. 0002 HD_REF The signal which is input to the HD REF IN connector is used as the reference. 0003 SD_REF The signal which is input to the SD REF IN connector is used as the reference. 0004 E-AUTO In edit mode, the state is the same as set in [INPUT]. In modes other than edit mode, the state is the same as set in [AUTO]. For details, refer to [Playback reference signal specifications for tape playback] (page 45). *1: When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, SD) mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed. *2: When the 23/24 Hz mode is selected in System Menu No. 25 (SYSTEM FREQ), this item is not displayed. *The underlining (__) denotes the factory setting mode. 85