Panasonic AJHDC27HP AJHDC27H User Guide - Page 13
Viewfinder
View all Panasonic AJHDC27HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Parts and their functions (continued) Viewfinder section = > ;7 7 Front tally lamp 9 This lamp is activated when the TALLY switch 3 is : set to the HIGH or LOW position, and it lights while the VTR unit is recording. It also flashes to provide < a warning display like the REC lamp inside the 1 viewfinder. The lamp's brightness (HIGH or LOW) when it is lighted can be selected using the TALLY switch. 452 3 6 8 ON OFF (For details concerning the viewfinder, refer to the operating instructions of the viewfinder.) 1 Viewfinder (optional accessory) While recording or playback is underway, pictures can be viewed through the viewfinder in black and white. The warning displays concerning the unit's operation statuses and settings, messages, zebra patterns and markers (safety zone markers and center marker) can also be seen in the viewfinder. 2 ZEBRA (zebra pattern) switch This is used to display the zebra pattern in the viewfinder. ON : The zebra pattern is displayed. OFF : The zebra pattern is not displayed. When the unit is shipped, the zebra pattern is set so that an area of less than 85% is displayed with a video level of at least 80% or so. The required area of zebra pattern can be displayed by setting the ZEBRA 1 DETECT, ZEBRA 2 DETECT and ZEBRA 2 items on the FILM (CAM) MAIN MENU 2 screen. 8 Back tally lamp This lamp lights while the VTR unit is recording. It also flashes to provide a warning display like the REC lamp inside the viewfinder. When the lever is set to OFF, the back tally lamp is hidden. 9 Eyepiece : Diopter adjustment ring This is adjusted in line with the camera operator's diopter in such a way that the user can see the image on the viewfinder screen most clearly. ; Connecting plug < Locking ring = Microphone holder > Viewfinder stopper This is used to attach and remove the viewfinder. @ 3 TALLY switch ? This is used to control the front tally lamp 7. HIGH: The brightness of the front tally lamp is increased. OFF : The front tally lamp is turned off. LOW : The brightness of the front tally lamp is reduced. 4 PEAKING control This is used to adjust the outlines of the images seen inside the viewfinder to make focusing easier. Its adjustment does not affect the output signals of the camera. 5 CONTRAST control This is used to adjust the contrast of the picture seen inside the viewfinder. Its adjustment does not affect the output signals of the camera. 6 BRIGHT control This is used to adjust the brightness of the picture seen inside the viewfinder. Its adjustment does not affect the output signals of the camera. ? Viewfinder left-right position anchoring ring This is used to adjust the left-right position of the viewfinder. @ Viewfinder front-back position anchoring ring This is used to adjust the front-back position of the viewfinder. For details, refer to "Adjusting the viewfinder" (page 34). 13