Panasonic AJHPX3700G AJHPX3700G User Guide - Page 112

RGB 4:4:4 Output and P-10LOG Settings This unit can output signals suitable for Digital-Intermediate, which is a film production workflow. RGB 4:4:4 Output and P-10LOG Settings Link A signal is output from the HD SDI A connector and Link B signal is output from the HD SDI B connector by performing the cinematograph setting, and it is possible to set these signals as P-10LOG for RGB 4:4:4 output. For cinematograph settings, see page 109 and later. Refer to the following procedures to set the above without using the cinematograph setting. 1 Open the screen from the PAINT page with menu operation. 2 Select GAMMA MODE SEL using the JOG dial button, and press the JOG dial button. 3 Turn the JOG dial button and select "FILM-REC", then press the JOG dial button. 4 Open screen from SYSTEM SETTING page with menu operation. 5 Select SIGNAL FORMAT using the JOG dial button, and press the JOG dial button. 6 Turn the JOG dial button and select "4:4:4", then press the JOG dial button. 7 Select P-10LOG using the JOG dial button, and press the JOG dial button. 8 Turn the JOG dial button and select "ON", then press the JOG dial button. 9 Press the MENU button to complete the menu operation. Notes Recording to the P2 card and MON OUT signal will be YPBPR 4:2:2 even if the signal is set to P-10LOG for RGB 4:4:4. If you select "ON" in P-10LOG setting, 2D-CMS will operate in accordance with P-10LOG as well. Example of Digital Cinema Recording Film camera Ð AJ-HPX3700G Equipment to convert film to digital data Ð Convert Ð film to data Hard disk recorder, etc. Ð Color grating process Ð Film recording Ð Film print Ð Screening Transition Chart of FILM-REC Gamma to P10LOG 100 VIDEO-REC 50 30 0 1000 FILM-REC NORMAL 18% GRAY +4 stop +3 stop 500 +2 stop +1 stop P-10LOG Normal -1 stop -2 stop -5 stop -4 stop -3 stop 0 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 112 Adjustments and Settings for Recording: RGB 4:4:4 Output and P-10LOG Settings