Panasonic AJSD930 AJSD930 User Guide - Page 11

Parts and their functions Display panel 1 2 3 45 6 7 525 625 REMOTE VIDEO dB dB dB dB Y PB PR 0 0 0 0 CUE CMPST -4 -4 -4 -4 dB -8 -8 -8 -8 -8 -12 -12 -12 -12 -12 -16 -16 -16 -16 -16 SDI SDTI/1394 SG 1 2 -20 -20 -20 -20 -20 -25 -25 -25 -25 -25 CTL -30 -30 -30 -30 -30 TC - - - - - L R L R L R L R L R UB AUDIO SCH SERVO ANALOG AES/EBU = EDIT REC INH USER SET SDI SDTI/1394 SG DVCPRO 50 DVCAM 1 TV system displays The selected TV system is displayed here. With the AJ-SD955A, it is possible to switch between the 525 interlace and 625 interlace systems by setting setup menu item No. 070 (TV SYSTEM). With the AJ-SD930, only the 525 interlace TV system can be used. 525 : This lights when the 525 interlaced TV system has been selected. 625 : This lights when the 625 interlaced TV system is selected. SD955A 2 REMOTE lamp This lamp lights when the CONTROL switch has been set to the REMOTE position. 3 INPUT SELECT display area The characters corresponding to the selected input signals light. With all input signals except for analog audio signals, the fact that no signals have been selected is indicated by a flashing display. VIDEO Y PB PR : Analog component video signals (option) CMPST : Analog composite video signals (option) SDI : Serial digital video signals SDTI/1394 : Compressed digital signals (option) SG/SG 1/SG 2: Internal reference signals AUDIO ANALOG : Analog audio signals AES/EBU : Digital audio signals USER SET : Recording audio signal selection SDI : Serial digital audio signals SDTI/1394 : Compressed digital signals (option) SG : Internal reference signals 4 = lamp This lamp lights when a cassette tape is inserted into the VTR. 5 SCH lamp This lamp lights when the SCH phase of the external synchronized signal (REF VIDEO) is inside the prescribed range. At all other times, the lamp is off. 6 SERVO lamp This lamp lights when the drum servo or capstan servo locks. 7 Channel condition lamps These lamps light to indicate the error rate status. (green 5 white 5 red) Green: This lights when the error rates for the video and audio playback signals are both at acceptable levels. White : This lights when the error rate for the video or audio playback level has increased. The playback picture and sound remain unaffected even while this lamp is lighted. Red : This lights when the error rate for the video or audio playback level has increased to the extent that correction or interpolation was performed. 11