Panasonic AJSPC700P AJSPC700P User Guide - Page 99
Menu Description Tables
View all Panasonic AJSPC700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 8 Menu Description Tables (continued) 8-2 SYSTEM SETTING 8-2-1 SYSTEM MODE Items/ Adjustable Data Saved Range Remarks Items/ Adjustable Data Saved Range Remarks REC SIGNAL CAM VIDEO 1394 Select video input signals. CAM Record the signal from the camera VIDEO: Record the signal from the GENLOCK IN terminal 1394: Record the signal from the 1394 input terminal (when optional AJ-YAD800G is attached) z After the power has been turned OFF, this setting defaults to CAM when the power is turned ON again. z With VIDEO selected, to synchronise this camera-recorder to the video signal (VBS) that is input to the USB ON OFF - -UF- Select the USB drive mode when using the P2 card as bulk storage by connecting the AJ-SPC700P with a PC via USB2.0. ON: Switches to the USB drive mode. Recording, playback or thumbnail operation via the AJSPC700P is not permitted. OFF: Stops the USB drive mode, and returns to normal operation. After the power is turned off, this setting defaults to "OFF" when the power is next turned on. GENLOCK IN terminal, the GENLOCK item in [8-2-6 GENLOCK] - CU F E must be set to EXT. ASPECT 16:9 4:3 Select the aspect ratio for recording. 16:9: Record in aspect ratio. 8-2-2 OPTION MODE 8 - CU F E REC MODE 50M 4:3: Record in aspect ratio. Select the recording mode. Items/ Adjustable Data Saved Range Remarks 25M DV - CU F E 50M: Record in DVCPRO50 format. 25M: Record in DVCPRO format. DV: Record in DV format. SAVE SW (AUD ON OUT) OFF Select whether or not to forcibly disable the audio output when the SAVE ON/ OFF switch is set to [ON]. SET UP 0% Switch the setup. ON: Disable audio output. 7.5%A 0%: Setup is switched to 0% for both -CUF - OFF: Enable audio output. - CU F E REC TALLY RED the camera output and the recording. 7.5%A: Setup is switched to 7.5% for the camera output and 0% for the recording. Selects display of the recording status SAVE SW (LCD) ON OFF -CUF - Select whether or not to automatically turn off the LCD monitor when the SAVE ON/OFF switch is set to [ON]. ON: Turn off LCD monitor. OFF: Do not turn off LCD monitor. GREEN CHAR of the camera when the AJ-SPC700P is controlling an external VTR, by setting the menu option 1394 CONTROL to "BOTH". The menu option 1394 CONTROL is found in the OPTION MODE screen on Menu options for setting 1394 are displayed when an IEEE1394 interface board (AJ-YAD800G, optional) is attached. For more information, see the AJ-YAD800G - CU F E ACCESS LED ON OFF - CU F E the SYSTEM setting page. RED: The red tally lamp lights up. GREEN:The green tally lamp lights up. CHAR: The VF displays [REC] in characters. 1394 control menu options are only displayed when an IEEE1394 interface board (AJ-YAD800G, optional accessory) is attached. For more information, see the AJ-YAD800G instruction manual. Select whether or not to enable illumination of the P2 card access LEDs. ON: Enable the P2 card access LEDs to light up for card status indications. OFF: LEDs remain off. instruction manual. Note that the AJ-SPC700P incorporates the following additional items: Items/ Adjustabl Data Saved e Range Remarks 1394 CONTROL OFF BOTH -CUF - Select the control method for recording when an external device for backup recording is connected via the DVCPRO/ DV connector: OFF: The external device is not controlled. BOTH:Recording is performed by both the AJ-SPC700P and the external device. 1394 CMD SEL REC_P STOP -CUF - Determine the recording operation of the external backup device when the REC START/STOP button is pressed: REC_P: Record/Pause STOP: Record/Stop The ____ in the Adjustable Range column indicates the preset mode. 99