Panasonic AKHC1800N AKHC1800N User Guide - Page 18
Control exercised from the AW-CB400., For selecting GAIN L, M, H or S1.
View all Panasonic AKHC1800N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
How to set up the system Control exercised from the AW-CB400 When using the AW-CB400 for the AK-HC1800N, its switches and dials function as shown in the figure below. For capturing the camera statuses, and synchronizing the data. (Statuses of panel switches only) For setting DTL to either ON or OFF. For selecting GAIN L, M, H or S1. • S2 and S3 cannot be set. For switching the GAIN/PED display and controller setting menu display. For details on the camera's functions, open the camera's menu and select the settings. When these switches are pressed while their lamps are off, the PRESET, USER1 and USER2 files are opened, respectively. When any one of these switches is pressed while its lamp is lighted, the CURRENT file is opened. The switch lamp lights while the file is being opened. For executing AWB.*1 For switching between CAM or BAR. For controlling the MASTER PEDESTAL. (−150 to +150) For controlling IRIS AUTO, MANU and LOCK. For controlling the iris when IRIS is set to MANUAL. For executing ABB.*1 For controlling R/B GAIN. (-150 to +150) For controlling R/B PED. (-100 to +100) These are the OPTION switches, and each switch makes it possible to control one of the items listed below. (The items are set on the controller setting menu.) • Camera menu operations A: MENU B: ENTER C: UP D: DOWN • ZOOM TELE/WIDE control • FOCUS NEAR/FAR control • ND FILTER control • DIGITAL EXTENDER control *1: The lamp of the ABB or AWB switch flashes while automatic white balance or automatic black balance is being executed, respectively. When ABB or AWB is completed successfully, the corresponding lamp goes off; when it is not completed successfully, it lights up. When changing the panel display for use with the AK-HC1800N, please use panel sheet VGKB0008 (sold separately as a replacement part). Ver.2.00 or a subsequent version of the AW-CB400 software must be installed in order for the AK‑HC1800N to be controlled using the AW-CB400. To check the software version of your AW-CB400, contact your dealer. - 18 -