Panasonic AW-HE100 Menu Operations - Page 8
When the camera is to be controlled from the AW-CB400/AW-RP400 controller
View all Panasonic AW-HE100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Basic menu operations When the camera is to be controlled from the AW-CB400/AW-RP400 controller The EXT command is allocated to the [OPTION SW] button to switch between Auto Focus and Manual Focus. Each time the [EXT] button is pressed, the focus mode switches between Auto Focus and Manual Focus. The following functions allocated to the [OPTION SW] are not available: DEF, WIP, HEATER/FAN, LAMP, OPTION, ND The following settings of the LCD menu do not function: TILT RANGE, MEMORY LENGTH The TRACING MEMORY function is not available. The R/B PED dial is not available. Do not use the OPTION function of the AW-CB400 to operate the ZOOM/FOCUS, use the ZOOM lever or FOCUS dial of the AW-RP400 instead. The camera menu operation becomes available when the CAMERA MENU CNT item is set to ENABLE in the LCD menu of the AW-CB400. [OPTION SW] [A]: Opens the menu and also scrolls up the item list. [B]: Scrolls down the item list. [C]: Confirms the item selection and also changes a set value in the positive direction. [D]: Changes a set value in the negative direction. 1 Press one of the [1] to [5] buttons of [CONTROL SELECT] to select the unit which is to be operated. 2 Press the [A] button of [OPTION SW] for two seconds. The main menu is displayed on the monitor. 3 Press the [A] or [B] button of [OPTION SW] to make the item to be selected blink. Press the [A] button of the [OPTION SW] to scroll up the item list. Press the [B] button of the [OPTION SW] to scroll down the item list. 46