Panasonic AW-HE38H AK-HRP1000 Operating Guide with AW-UE70 AW-HE38 AW-HE40 - Page 5
Connections, Serial connection
View all Panasonic AW-HE38H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connecting the Unit to AW-UE70/AW-HE35/AW-HE38/AW-HE40/AW-HE70 Series Cameras Connections Set the connection setting to [Serial(AW3)] or [LAN(AW3)] in the [CONNECT SETTING] menu. ヤモヮヒ ヤモヮビ ヤモヮピ ロモワ ワヰワ ヤモヮフ ヤモヮブ ヤモヮプ ワヰワ ワヰワ ワヰワ ヤモヮヘ ヤモヮベ ヤモヮペ ワヰワ ワヰワ ワヰワ NOTE To connect with the AW-UE70/AW-HE35/AW-HE38/AW-HE40/AW-HE70, upgrade the system version of the unit to 4.30-00-0.00 or later. When connecting, observe the following points. Serial connection Use a dedicated cable to connect the [CCU] connector of this unit to the [RS-422] connector of the AW-UE70/AWHE35/AW-HE38/AW-HE40/AW-HE70. Use a PoE power supply for the power supply. LAN connection Connect the [LAN] connector on this unit to the [LAN ACT/LINK] connector on the AW-UE70/AW-HE35/AW-HE38/AWHE40/AW-HE70 using a LAN cable (sold separately). Configure the camera IP address and port number settings of the connection destinations in [CAMERA IP SETTING] as well. This unit can be powered using PoE. Use a switching hub with PoE support. Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP). For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer. -5 -