Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 38

Settings for connecting with the remote cameras (continued) Manually setting the connection destination IP addresses (remote cameras) and port number Use the following procedure when connecting (via a router) remote cameras whose IP addresses cannot be set by following the steps in "auto IP setting" or to manually configure the link settings for the unit and remote cameras. 1. Select the "MANUAL IP SET" SYSTEM menu, turn the F1 dial to display the camera number whose settings you want to change. CAM01 : AW-UE150 1 CAMERA 6 2 CONNECT SETTING TRACKING 3 MANUAL IP SET 4 AUTO IP SET 1 / 1 5 RP IP SET 1 CAM SEL 1 2 CAM IP 192 168 3 PORT 80 0 10 UPLOAD NO? 11 2. Set the IP address (remote camera) and PORT number. Operate "CAM SEL" in the first row to select the camera number for which you want to set the IP address that will be the connection destination. The rows from the second and so on display the existing IP address and PORT number for each corresponding camera number. Set the connection destination IP address in "CAM IP" in the second row. The screen is divided into 4 blocks and these are set using the F1 to F4 dials. Set the connection destination PORT number in "PORT" in the third row using the F1 dial. Execute "UPLOAD" after setting. The set IP address and PORT number settings are not updated if "UPLOAD" is not executed. Setting is also possible for camera numbers whose connection type is "NON" or "Serial" in [SYSTEM] button > [CONNECT SETTING]. zzThis is set to the following value by default. CAM1 : 192.168.0.10 ↓ CAM200 : 192.168.0.209 „„Settable port numbers You can set a value within the range of 1 to 65535. However, the following values cannot be set even though they are within this range. 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10669, 10670 Note zzThe IP addresses set on the remote cameras are not changed by this operation. Initializing the connection destination IP addresses set on the unit Use the following procedure to initialize the connection types and connection destination IP addresses set on the unit. 1. Select the "RP INIT" MAINTENANCE menu and select the "INIT ALL". CAM01 : AW-UE150 1 CAMERA MENU OP 6 GPI TALLY 2 RP SETTING 7 GPIO CAM SEL 3 FILES 8 GPO CAM.G 1 INIT ALL NO? INIT NO? 4 RP INIT 9 GPI PMEM 1 / 1 5 RP VERSION 10 GPI PMEM.G 11 2. Press the F1 dial to execute initialization. The settings for connecting with the remote cameras are initialized. zzWhen the connection type is set to "LAN", it is changed to "NON". When the connection type is set to "Serial", it is not changed. zzIf the IP address of the unit is changed, the connection destination IP addresses are changed automatically. • IP addresses after the IP address of the unit are set for the camera numbers in ascending order. zzWhen the IP address of the connection destination is changed, checks are made for duplicate IP addresses set in other items. The "IP Duplicate!" message is displayed when the IP address is duplicated. zzThe "Unavailable network setting" message is displayed when the PORT number specified cannot be set. 38