Panasonic AWHE60H AWHE60H User Guide - Page 37
Control exercised from the Multi Hybrid Control Panel AW‑RP555
View all Panasonic AWHE60H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Basic operations (continued) wwControl exercised from the Multi Hybrid Control Panel AW‑RP555 Each time the [GAIN] button is pressed, the setting is switched in the sequence of GAIN AUTO 0dB L (9dB) H (18dB), and the mode is displayed by the LEDs as shown below. [ON: LED lights; OFF: LED off] GAIN MANU L MANU H button LED LED AUTO ON OFF OFF 0dB OFF OFF OFF LOW OFF ON OFF HIGH OFF OFF ON Others OFF ON ON For executing AWB. *1, *2 Each time the [MODE] button is pressed, the setting is switched between CAM and BAR. The [MODE] button lights up at the BAR setting. For selecting the cameras to be operated. For switching the contrast mode. *3 Shutter mode selection Each time this button is pressed, one of the shutter modes set by the controller or "shutter OFF" is selected. The [SHUTTER] button lights up in all modes except shutter OFF. The shutter mode settings established by the [PRESET] buttons are as follows. MODE PRESET No. MODE PRESET No. 1/100**1 1/120**2 PRESET1 1/4000 1/10000 PRESET6 PRESET7 1/250 1/500 PRESET2 PRESET3 SYNCHROSCAN PRESET8 1/1000 PRESET4 ELC PRESET9 1/2000 PRESET5 OFF PRESET10 **1: "1/100" when 59.94 Hz is selected as the frequency setting of the AW‑HE60. **2: "1/120" when 50 Hz is selected as the frequency setting of the AW‑HE60. For switching WHITE BAL A, B or ATW. *4 The unit does not have an ABC function. For switching the SCENE file (FullAuto, Manual1 to 3). For operating the camera menus. MENU: This operates in the same way as MENU on the camera. ITEM: This operates in the same way as ENTER on the camera. YES: This operates in the same way as UP on the camera. NO: This operates in the same way as DOWN on the camera. This is used to switch between the Day mode and Night mode. Each time the [(AF)EXT] button is pressed, the focus setting is switched between auto focus and manual focus. When auto focus is selected, the [(AF)EXT] button lights. When the focus setting is switched between auto focusing and manual focusing by the camera, the resulting status (lamp on or off) will not be reflected in the button. *1: The lamp of the AWC switch flashes while automatic white balance is being executed. When AWB is completed successfully, the lamp goes off; when it is not completed successfully, it lights up. *2: The switch lights without AWB being executed when the white balance mode of the main unit is ATW, or when the Color Bar is being displayed. *3: The contrast level can be adjusted in the AUTO mode. *4: There is a delay in the switching of the display when the settings are changed on the camera. 37