Panasonic AX200U Operating Instructions - Page 31

PICTURE menu COLOR TEMPERATURE You can adjust the white balance of the projected image. Less bluish Less reddish Setting range: -6 to +6 DYNAMIC IRIS You can switch automatic adjustment system of the lamp and the lens iris, which control the contrast and black level, on/off. ON: Automatic adjustment OFF: No adjustment LIGHT HARMONIZER The luminance sensor detects the brightness of the room and keeps the luminance in balance automatically. If needed, you can switch this function on/off from MODE, or adjust it manually from MANUAL by pressing I H. Setting range: -8 to +8 NOTE: • To assure correct performance of the LIGHT HARMONIZER, do not interrupt the light on to the luminance sensor. See "Projector body" on page 12. ADVANCED MENU You can perform more detailed image adjustment manually. J GAMMA You can adjust linear intensity at 3 levels. Press I H to increase/decrease 1 point. Levels Default setting GAMMA HIGH 0 GAMMA MID 0 GAMMA LOW 0 Setting range: -8 to +8 J CONTRAST You can adjust the amount of contrast in RGB colors individually. Press I H to increase/ decrease 1 point. RGB Default setting CONTRAST R 0 CONTRAST G 0 CONTRAST B 0 Setting range: -16 to +16 J BRIGHTNESS You can adjust the brightness in RGB colors individually. Press I H to increase/decrease 1 point. RGB Default setting BRIGHTNESS R 0 BRIGHTNESS G 0 BRIGHTNESS B 0 Setting range: -16 to +16 J COLOR MANAGEMENT You can manage your own defined color settings. See "Setting your own color profile" on page 24. J NR (Noise Reduction) You can switch the automatic noise reduction system on/off. Press I H to select the required setting. ON: Automatic noise reduction OFF: No noise reduction J MPEG NR You can switch the automatic noise reduction system for MPEG format images on/off. The system minimize block noise and mosquito noise to eliminate jagged edges, providing an overall smoother image. Press I H to select the required setting. ON: Active OFF: Deactive NOTE: • MPEG NR system is not available with COMPUTER/ HDMI (VGA480) signals. J CINEMA REALITY You can switch the automatic image synchronizer on/off for 24 frames a second images, such as movies. Press I H to select the required setting. ON: Active OFF: Deactive NOTE: • CINEMA REALITY is effective only with interlace signals. Settings ENGLISH - 31