Panasonic BT-LH910G Brochure - Page 5
Outstanding Display Performance, Extensive Recording Assist Functions, and a Wealth of Interfaces
View all Panasonic BT-LH910G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Outstanding Display Performance, Extensive Recording Assist Functions and a Wealth of Interfaces for Broadcasting Use. Cine-gamma and New Black Mode The BT-LH910G is equipped with a cine-gamma (F-REC) compensation function and serves as a monitor for the Varicam camera recorder. The new black mode also makes dark image areas in low-gradation scenes easier to see. It helps to produce movies as well as film-like HD programs and commercial. Black Mode ON Normal Mode Black Mode Luminance *Pictures simulated. Input Level 75% New Audio Level Meter and Headphone Terminal The new color audio level meter displays the embedded audio (3G-SDI, SDI, HDMI*) input level. And it's equipped with reference point setting, peak hold and overrange display functions. The BT-LH910G is also provided with a headphone terminal. The channel to be monitored is easily selected from the menu. *For HDMI input, the level meter displays only two channels. WFM (Y/R/G/B) and Vector Scope Display The BT-LH910G has built-in waveform monitor and vector scope functions to display the input signal waveform and color gamut. For waveform display, the signal can be selected from Y, R, G and B. *The WFM function can be used for all input signals. The vector scope function can be used for 3G-SDI and SDI input. Focus Assist Functions for HD Shooting • Focus-in-Red: Emphasizes the sharply focused area of the image by showing it in an easily visible red. • Pixel-to-Pixel: Displays video pixels without any resizing. With 1080i/p input signals, you can check the focus with a screen Focus-in-Red ON width equivalent to 34.3 cm (13.5 inches). Closed Caption and Time Code Display The BT-LH910G can display closed captions with an SDI or VIDEO input. It supports the EIA-708 HD-SDI closed captioning standard (EIA-608 SD-SDI closed captioning standard), and can display up to eight windows simultaneously. The BT-LH910G can also display the time code (selectable from VITC, LTC and UB) with an SDI input. Various Markers Various markers can be displayed in both 16:9 and 4:3 aspect ratios. • Aspect Marker (16:9): 4:3, 13:9, 14:9, CNSCO2.39, CNSCO2.35, 2:1 or VISTA, with background brightness Safe Area /Center Marker control of Black (0%), Half (50%) or Normal (100%). • Safe Area Marker (16:9/4:3): 95%, 93%, 90%, 88% or 80%. • Center Marker (16:9/4:3): ON/OFF. The center marker can be displayed together with another marker, as shown in the example above. In 16:9 mode, the BT-LH910G can display a superimposed safe area marker corresponding to the aspect marker which is selected. A Diversity of Display Functions • Cross Hatch Overlay: Displays grids with 40 or 80 pixel intervals. This is useful for horizontal/vertical adjustment. • HV Delay Display: Displays the video blanking period. • Mono Mode: Displays images in black-and-white. • Split Screens: A frame of video can easily be frozen and displayed as a still image on the left side of the screen. This function can be used to match a live camera with a frame of video shot at an earlier time or with a different camera. Three Function Keys Each of the function keys can be assigned with a function selected from various display and switchover functions to enable one-touch ON/OFF or mode change. Functions Assignable to Function Keys HV Delay/Blue Only/Gamma Select/SD Aspect/Scan/Sub Window/ WFM/Vector/Marker/White Balance/Pixel To Pixel/Pixel Position/ Focus-In-Red/Zebra/Rear Tally/Level Meter/Cross Hatch/Mono/ Black Mode/Time Code/Closed Caption/Undef Versatile Input Terminals, Including 3G-SDI and HDMI The BT-LH910G is equipped with input terminals for 3G-SDI, SDI (HD and SD), HDMI, composite (Video) and component (YPBPR) signals. It supports almost all HD/SD video signals for use in various applications worldwide. Viewfinder Connector Equipped with a 15-pin viewfinder terminal, the BT-LH910G can also be used as a viewfinder for compatible Panasonic camera recorders* (requiring the optional BT-CS910G VF Cable). *AJ-HPX3700, AJ-HPX2700, AJ-HPX3100, AJ-HPX2000, AJ-HPX2100, AJ-HDX900, AG-HPX500 series (AG-HPX500 series displays SD resolution in black-and-white.). Optional hardware is required for mounting to a camera recorder. Designed for Broadcast Field Work • Tilt stand and headphone terminal. • The front and rear tally lamps are also functional when the monitor is used as a camera viewfinder. • SERIAL (9-pin) and GPI (9-pin) remote input terminals. • The slim, lightweight, compact body allows flexible installation and setup. • Robust, durable magnesium diecast frame. • DC drive. Anton Bauer battery can be mounted to the back.