Panasonic BTLH2550E BTLH2550E User Guide - Page 31
Performing AUTO CALIBRATION, RESET operation, Select YES and press [ENTER].
![]() |
View all Panasonic BTLH2550E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Main Menu (continued) ■ CALIBRATION Select CALIBRATION in the "SYSTEM CONFIG" menu to open the following menus. Sub menu AUTO CALIBRATION*1 RESET*2 Setting Description Connect a CA-210 color analyzer and use this submenu to make a calibration. Select "AUTO CALIBRATION" and select "YES" in the confirmation screen that appears to start calibration. Returns calibration data to their factory defaults. Select "RESET" and select "YES" in the confirmation screen that appears to return calibrated values to their factory defaults. *1 "EXECUTING" is displayed during "AUTO CALIBRATION" and "COMPLETE" appears when calibration ends. "INCOMPLETE" appears if calibration could not be completed. *2 When "RESET" ends, "COMPLETE" appears. Performing AUTO CALIBRATION RESET operation 1. Press [ , ] in the "SYSTEM CONFIG" menu, select the [CALIBRATION] submenu and press [ENTER]. 2. Press [ , ], select the [AUTO CALIBRATION] submenu and press [ENTER]. 1. Press [ , ] in the "SYSTEM CONFIG" menu, select the [CALIBRATION] submenu and press [ENTER]. 2. Press [ , ], select the [RESET] submenu and press [ENTER]. [AUTO CALIBRATION] [RESET] 3. Select "YES" and press [ENTER]. This starts calibration. [AUTO CALIBRATION] 3. Select "YES" and press [ENTER]. This starts calibration. [RESET] xxxxxxxxx indicates that one of the following messages with the meaning listed below appears. EXECUTING: Operation in progress COMPLETE: Operation completed INCOMPLETE: Operation did not complete. (Check RS-232C cable connection.) xxxxxxxxx indicates that the following message with the meaning listed below appears. COMPLETE: Operation completed 31
![](/manual_guide/products/panasonic-btlh2550e-btlh2550e-user-guide-0710ed7/31.png)