Panasonic C700U Operating Instructions - Page 33
Troubleshooting - cq wiring
UPC - 037988758425
View all Panasonic C700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English Customize the Display, Troubleshooting Troubleshooting If You Suspect Something Wrong Check and take steps as described below. If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Servicenter. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking. Never take measures especially for those other than indicated by italic letters in "Possible Solution" described below because those are too dangerous for users to handle themselves. Warning ¡ Do not use the unit in an irregular condition, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer. ¡ Never try to repair the unit by yourself because it is dangerous to do so. Problem Possible cause a Possible solution No power to the unit The power cord (battery, power and ground) is connected in the wrong way. a Check the wiring. Fuse blows out. a Eliminate the cause of fuse blowout and replace the fuse with new one. Consult your dealer. Sound is not generated. Noise MUTE is set to ON. a Set MUTE to OFF. The wiring of speaker lines are not correct, or a break or poor contact arises. a Check the wiring in accordance with the wiring diagram. (Installation Instructions) There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines. a Keep an electromagnetic-wave generator such as a cellular phone away from the unit and the wiring of the unit. In case that noise cannot be eliminated due to the wiring harness of the car, consult your dealer. The contact of the ground lead is poor. a Make sure that the ground lead is connected to an unpainted part of the chas- sis securely. Common Noise is made in step with engine revolutions. Alternator noise comes from the car. a Change the wiring position of the ground lead. a Mount a noise filter on the power supply. CQ-C700U 33