Panasonic CF-19RJRCX2M User Manual - Page 26
Starting Up, Entering Password, Shutting down, Display
View all Panasonic CF-19RJRCX2M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Troubleshooting (Basic) Starting Up Cannot resume. Other startup problems. z An error may occur when the computer automatically enters the standby or hibernation mode while the screensaver is active. In this case, turn off the screensaver or change the pattern of the screensaver. Press F9 in the Setup Utility ( page 24 "To start the Setup Utility") to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again. z Remove all peripheral devices. z Check to see if there was a disk error. A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties]. B Click [Tools] - [Check Now]. C Select the option in [Check disk options] and click [Start]. z Start the computer in Safe Mode and check the error details. When the [Panasonic] boot screen disappears*1 at startup, press and hold F8 until the Windows Advanced Options Menu is displayed. *1 When [Password on boot] is set to [Enable] in the [Security] menu of the Setup Utility, [Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you enter the password and press Enter, press and hold F8. Entering Password On the [Enter Password] screen, a beep sounds and the password cannot be entered. Even after entering the password, [Type your password] is displayed again. The computer may be in ten-key mode. If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then input. The computer may be in ten-key mode. If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then input. The computer may be in Caps Lock mode. If the Caps Lock indicator lights, press Caps Lock to disable the Caps Lock mode, and then input. Shutting down Windows does not shut down. Remove the USB device and the ExpressCard. Wait one or two minutes. It is not a malfunction. Display No display. The screen is dark. The LCD brightness changes a number of times when the AC adaptor is disconnected. The external display is selected. Press Fn + F3 to switch the display. Wait until the display has been switched completely before pressing Fn + F3 again. When using an external display, Check the cable connection. Turn on the display. Check the settings of external display. The display is turned off by the power-saving function. To resume, do not press the direct selection keys, but press any other key like Ctrl. The computer entered standby or hibernation by the power-saving function. To resume, slide the power switch. The screen may not be displayed even after the computer resumed from standby or hi- bernation. In this case, press Fn+ F7 to enter standby and resume the computer again. The screen is darker when the AC adapter is not connected. Press Fn + F2 and adjust the brightness. As you increase the brightness, battery consumption increases. You can separately set the brightness for when the AC adaptor is connected and when not connected. Intel(R) Display Power Saving Technology is active and automatically changes the LCD brightness. This is not a malfunction. Troubleshooting 26