Panasonic CF-VEBU06W Port Replicator- Multi-lang - Page 5

ENGLISH Connecting 1 Turn the computer off. Do not use the standby or hibernation function. 2 Connect the mini port replicator to the con- nector of the computer. Expansion bus connector Disconnecting 1 Turn the computer off. Do not use the standby or hibernation function. 2 While pushing the connector's lock button, pull the connector out straight. NOTE If the mini port replicator is connected to the computer, connect the LAN cable, the external display cable, or the AC adaptor to the ports or jack on the mini port replicator. You cannot use the LAN port, the external display port, or the DC-IN jack on the computer. When connecting a USB 2.0 printer · Connect the printer to any of the USB 2a/2b/2c ports or the USB port of the computer. If you connect to USB port 1 and then disconnect the printer, the USB 2a/2b/2c ports may be disabled. In this case, restart the computer. When devices connected to USB ports (2a, 2b, 2c) will not operate: · Confirm that the consumption current for the connected device is 100 mA or less. If the current exceeds 100 mA, connect the device to USB port 1 or to a USB port on the computer. For more information about the settings and preparations of the peripheral devices, refer to the peripheral devices' own operating instructions.