Panasonic CF-W4HCEZZBM Operating Instructions - Page 48
Problems with Operation during Use, Problems with Display
UPC - 092281861371
View all Panasonic CF-W4HCEZZBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Dealing with Problems (Summary) Problems with Display Nothing appears on the external display, or the display is not correct To use both the external display and the internal LCD z Check that the external display cables are correctly connected. z Check that the external display is turned on. z Check that the external display settings are correct. z When an external display not compatible with the power-saving mode is used with the computer, the display may not function correctly when the computer enters the power-saving mode. In this case, turn on the external display again. However, in the case of some external displays, the screen display may be distorted or the mouse cursor may not be properly displayed depending on the settings. In this case, try setting the number of colors, screen area (resolution), and refresh rate to smaller values. z Connect the external display, then press the Fn + F3 key to switch the display. If this does not switch the display, use the following procedure. A Click [start] - [Control Panel], from the [See Also] area click [Other Control Panel Options], then click [Intel(R) GMA Driver for Mobile] - [Devices]. B Click the display destination, and click [OK]. • When the screen is displayed to a simultaneous display: [Intel(R) Dual Display Clone] • When Extended Desktop mode is set: [Extended Desktop] z When [Command Prompt] is set to "Full Screen" by pressing the Alt + Enter key, the screen is displayed on one of the displays only. Press the Alt + Enter key to return to the window display. z Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.). Problems with Operation during Use Some applications may not work properly No response z When switching to a different user with the Fast User Switching function, the following problems may occur: • Some applications may not work properly. • Key combination with the Fn key may not work. • It may not be possible to set the settings of the display. • The wireless LAN cannot be used. • The B's CLiP icon will no longer be shown on the notification area and CD-RW disk cannot be written. In this case, log off all users without using Fast User Switching function, and try the operation once more. If the problem persists, restart the computer. z Some software applications installed after the time of purchase are not compatible with Windows XP Service Pack 2. Refer to software maker's homepage or other sources. z Is there an input screen (e.g., password input screen at startup) hidden behind another window? Use the Alt+Tab key to check for other windows being displayed. z Press the Ctrl+Shift+Esc key to open Task Manager and close the soft- ware application which is not responding. z After sliding the power switch for at least four seconds to turn off the com- puter, turn on again. If Windows runs correctly, but the application software does not start, click [start] - [Control Panel] - [Add or Remove Programs] and remove the failing application software, then reinstall the application software. Troubleshooting 48