Panasonic CF51MCMDDBM CF51LCCDDBM User Guide - Page 26
Shutting down, Battery Indicator, Display
View all Panasonic CF51MCMDDBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Dealing with Problems (Summary) Display When you want to display the fonts or icons at a larger size During simultaneous display, one of the screens becomes disordered When a video such as an MPEG file and a DVD video is being played with WinDVD or Windows® Media Player, the display destination cannot be switched using Fn+F3 When the screensaver is set, an error will occur during a resume operation Shutting down z Change the size of the icons, etc. using "Icon Enlarger" (⇒Reference Manual "Icon Enlarger"). z You can also change the settings as follows (for more details, refer to the Windows Help). A Select [start] - [Control Panel] - [Appearance and Themes] - [Display] [Appearance]. B Select the font size in [Font size], and select [Effects] and then add the check mark for [Use large icons] to increase the icon size. C Select [OK], then select [OK]. z To enlarge a part of the screen, use Loupe Utility (⇒Reference Manual "Loupe Utility"). z Try changing the display by pressing Fn+F3. z If you continue to experience problems, try changing the display destination in the following menu. [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile] - [Devices] z When the [Command Prompt] is set to "Full Screen" by pressing Alt + Enter, the picture is displayed on one of the screens only. When the window display is restored by pressing Alt + Enter, the picture is displayed on both screens. z Simultaneous display cannot be used until Windows startup is complete (during Setup Utility, etc.). When the Fn+F3 key is pressed, the screen is displayed on the external display or internal LCD. z The display destination cannot be switched while a video such as an MPEG file and a DVD video is playing. Stop playing the video before switching the display destination. z When the computer automatically enters the standby or hibernation mode while the screensaver is running, an error may occur during a resume operation. In such cases, turn off the screensaver or try changing the pattern of the screensaver. Windows cannot be shut down or restarted z If a USB device is connected, try removing it. z It may take one or two minutes to shut down. Battery Indicator The red indicator lights The red indicator blinks The green indicator blinks*1 z The battery level is very low (the charge is approx. 9% or less). Connect the AC adaptor. You can use the computer when the indicator light is orange. If you do not have an AC adaptor, save your data and power off your computer. After replacing the battery pack with a fully charged one, turn your computer on. z Quickly save your data and power off your computer. Remove the battery pack and disconnect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. The battery pack or charging circuit may be defective. z In high temperature mode, the battery pack is discharging to a level of 80%*2 in normal temperature mode.(⇒Reference Manual "Battery Power") Do not remove the battery pack while the battery indicator is blinking green, or the power will be turned off forcibly. *1 Only for the main battery pack. *2 A level of 80% in normal temperature mode is displayed as [100%] in high temperature mode. Troubleshooting 26